Tire Size Fitment Master Thread

[Advnirvana]

Another confirmed fit! 2021 Lariat FX4 with 265/70/18 Nitto Ridge Grapplers. Nice smooth ride and no rubbing. 2" Ford Performance / Fox Racing level kit.

Note, Ford Performance was not able to confirm that the current leveling kit works with 2021 Ranger. I checked with Fox and took my chances. No surprise, it fits.

Great looking truck.....just picked up a 2021 Lariat in the same color and will be installing the Fox 2.0 as soon as they come in. Looking to use the stock 18 inch wheels.

Sponsored

 

[Jimi15115]

2019 2WD XL - All stock with no leveling. 265/75R16 Cooper ATP II installed. No rubbing at either steering direction and no change in performance or MPG.

 

[VengeanceWithin]

Can any tell me if these wheels will fit with a 265/70R17 Tire without rubbing? They’re Fuel Vector Wheels 17”x8.5” 7mm Offset. My truck is leveled. I know things can vary truck to truck any help is appreciated.

 

[LoneRNGR]

My question is, if I get a matching spare - will it fit in the spare location? Thanks.

It will fit. Get a spare.

 

[Travis9935]

17X8 +25mm 275/70r17 Bfgoodrich ko2 at's

 

[NvrFinished]

17X8 +25mm 275/70r17 Bfgoodrich ko2 at's

Looks great! Do you have side shot? What type of lift do you have?

 

[Travis9935]

Eibach 2.0 coilover kit set @ 2"... No rear lift, just the Eibach shocks

 

[NvrFinished]

Eibach 2.0 coilover kit set @ 2"... No rear lift, just the Eibach shocks

Thanks much!

 

[JP11]

Anyone have an idea what’s the biggest you can squeeze in with 3.5” Lift/level? 285/60? 275 65?

thanks!

 

[arbjosh]

Based upon what others have said regarding clearance issues with stock wheels and stock ride height this is what I’ve come up with for the 17” and 18” stock wheels. At modest 1.5” increase in height and .4” increase in width for both tire upgrades.

Awesome

 

[arbjosh]

Anyone have an idea what’s the biggest you can squeeze in with 3.5” Lift/level? 285/60? 275 65?

thanks!

No idea

 

[arbjosh]

That's sounds promising. I'm ok with a little rubbing or some trimming, but if BDS is claiming that then its minimal in the worst case.

Thanks for your input.

Rubbing is bad

 

[arbjosh]

that's that setup I plan on running. once my wheels becomes available.

When are your wheels available?

 

[arbjosh]

Hey Josh

I'm guessing you've read through most of the posts. Whats the determination on the 285/70R17 with stock wheels and a leveling kit. In my case i just put on the RC 2.5" kit. I was thinking maybe 1/2" spacer would work.

Do you think they replied?I've got the same 2.5" kit and just had it installed.

 

[arbjosh]

Anyone with experience using spacers ? Looks like if you use a 1/4 in spacer it will help clear spindle .. want to go to tge ranger gold standard which is tko bfg 31x10.5 .. every ranger I had those fit with no modifications .. tge new wheel is 18x 8 ... so a 31 x 10.5 should fit even better than on the old 7.5 or 7 wheels .. those hankooks are crap !! .. might take truck up 2 inches in front then up in rear and maintain the rake .. be nice if I could fit the wheels and tires from my f 150 on it .. those are 32.1 tall stock .. then put the ranger wheels with a 33 on tge f 150 .. be a real unique combination

Is that an f-150? Does it have damper? Hahahahahah

Sponsored