Latest activity

  

  • Im not sure i can try see if there's any difference. But if it fits a tacoma im quite sure it will work on the runner. The zroadz site...
  • CO/ZA replied to the thread Rear view digital mirror.
    It's actually great at night as it can filter out headlight glare.
  • E90400K replied to the thread Reply to financial situation.
    $3.5B in capital costs to launch. I guesstimated a $27.5K Slate has about 30% margin in it, or $8,275. $8,275 into $3.5B is 422,961...
  • Grand Nat replied to the thread Bolt size for threaded holes in the bed.
    you, are right. it's a 100 degrees over here it must be the heat. lol
  • I charged my Ecoflow delta pro for over an hour at 1700+ watts and it didn't shut down or overheat.
  • RAD4RNR replied to the thread MSRP Thoughts.
    Just remember it comes with diffrent options and suspension then the OR or ORP. Don't know if you want to take it off road or not.
  • Chicane replied to the thread MSRP Thoughts.
    By then the value/selling price of my current vehicle will drop 2-3k, so there’s always that. So no, I’m not going to wish I waited...
  • dclear replied to the thread Installing THINKWARE U3000 Dashcam.
    This guy has it all figured out for the 4th gen Tacoma. He uses the 5 pin roof top connector without a dongar and gets constant power...
  • bakutheleo replied to the thread Cheap Mods for 6th Gen?.
    I have (although have not installed yet) ditch lights. If you ever want to off-road at night they are useful to illuminate beside/in...
  • a77cj7 replied to the thread Bolt size for threaded holes in the bed.
    Err. Thats the grade, not the size.
  • TTsTRD replied to the thread What is "Quality Hold" Status.
    Thank you!!!
  • PawsAndPRs replied to the thread What is "Quality Hold" Status.
    my TRD pro did the same. It disappeared from the site. It had just changed to est delivery 6/28-7/6 that morning. from what I’m reading...
  • Anyone looking to by the hybrid and plans to use the 2400 watt inverter plug. It will not run a 1000 watt load for more than 15-30min...
  • bakutheleo replied to the thread Cheap Mods for 6th Gen?.
    Something to consider--pistons will probably eventually fail and need to be replaced--hold up bars will not likely fail. IMO, the...
  • papadop88 replied to the thread Trailhunter Heritage Grill - Raptor Lights.
    If y'all are interested in the Hansshow Raptor Lights on their website and want to grab a discount on them, use 'motopapa' if you'd...
  • Massman replied to the thread Auto start/stop settings.
    Jason B may have solved the mystery I was experiencing when I first got my Lariat with the 2.7 in early Sept 2024. While many members...
  • jiggie replied to the thread Rear view digital mirror.
    There are aftermarket ones, but I doubt the OEM one will be available to be added, and or if it can, at a reasonable cost.
  • jiggie replied to the thread MSRP Thoughts.
    Sure - but then 2-3 years from now, people will say the same thing about updates. If history has told us anything, they will not be...
  • Massman replied to the thread Secrets, Tips & Tricks...Post Them Here.
    GLW, Like KrillOill, I would like to know how you mounted that inside the lid. Looks like it could be a useful addition for storage.
  • Chicane replied to the thread MSRP Thoughts.
    I had many discussions with Anaheim and they have $0 dealer mark ups, but they couldn’t get the Sport Premium/ color I want. Tustin is...
  • Also the Motoring Coffee instagram has eight pics. They say it will be there till "mid July".
  • Raptororbust replied to the thread Another new Raptor owner.
    Just picked mine up this past Sat. Same color, same wheels. You've got good taste!
  • 1yeliab_sufur1 replied to the thread Reply to financial situation.
    If that number is true and they stick with the 150,000 unites a year it would take them 2.81 years to start turning a profit if all...
  • 1yeliab_sufur1 replied to the thread Reply to financial situation.
    How did you get that number ?
  • Apparently it's on display for "the rest of the month" at Motoring Coffee, 11728 W. Olympic Blvd. in Los Angeles. This isn't in the...
  • I see. zroadz state it does not fit the hybrid model. Wonder if that is strictly on Tacomas or same with 4Runner. Curious what is...
  • atx_ev replied to the thread How does the truck bed work?.
    There looks to be front and rear vertical slots too. You can use those as dividers to keep stuff from sliding around, or mount things...
  • atx_ev replied to the thread How does the truck bed work?.
    they need a better vendor for their plywood sheets..
  • bakutheleo replied to the thread Rear view digital mirror.
    I wanted the brake controller, but was not critical and I took an available model that had everything I wanted minus that and the skid...
  • JONNYBOSCO replied to the thread Air dam falling off.
    Mines being held up with a "velcro strap" for now - I have service schedueld next week
  • df525 replied to the thread Rear view digital mirror.
    I saw it during the test drive. It looked pretty cool, but might be a distraction at night. It would be pretty big job for dealer to...
  • bakutheleo replied to the thread Toyota app needs a lot of work.
    Correct, although that turns off all notifications. Having the capability from within the app should give more granularity.
  • 4RunnerTony replied to the thread Toyota app needs a lot of work.
    I have an android phone and I was able to turn off the notifications. I can still manually check the app but my phone doesn't go beep...
  • E90400K replied to the thread Reply to financial situation.
    I've calculated they will start making profit at unit no. 423,961.
  • TTsTRD replied to the thread What is "Quality Hold" Status.
    Yesterday my ORP was showing up on toyota.com but today it isn't. Anyone have any idea if it means ita getting close to the dealership...
  • bakutheleo replied to the thread Toyota app needs a lot of work.
    I agree it is less than ideal...although the ability to check if the vehicle is locked or windows are open is useful (and to correct it...
  • I seen that one but I liked the zroadz one better as it looks more solid how the bracket mounts at the radiator support and has the...
  • According to their social media, they have a wrapped vehicle with SUV kit at Motoring Coffee in L.A. for the month (not sure if that's...
  • E90400K replied to the thread How does the truck bed work?.
    Well, just to get technical, from the bottom, sheets 1, 2, 4, 5, and 7 all have the same bend at the left rear corner. Like those five...
  • NYRunner replied to the thread What is "Quality Hold" Status.
    Seems like there is a wave of "OG quality hold" 4Runners that landed in the states around mid May. Then another wave put on QC hold in...
  • goodem replied to the thread What is "Quality Hold" Status.
    Just got this text from my dealer. “Our district manager said July 11th they will be released. Your 4Runner is in Lordstown Ohio, so ETA...
  • SLATEchad replied to the thread Reply to financial situation.
    As others have said, there's pretty much no way they start out at anything but a loss with all the startup costs. I think there's so...
  • HVLA replied to the thread What is "Quality Hold" Status.
    I got an update on mine just now. Ordered 6/20 Build Date 6/23 Original eta 7/22 - 8/10 Updated eta 7/22 - 8/7 So my window is not...
  • https://www.facebook.com/share/r/198f886FZu/
  • 1yeliab_sufur1 replied to the thread Reply to financial situation.
    Makes since
  • Duke Slater replied to the thread Reply to financial situation.
    Here’s the short version: Every automaker starts off at a loss, because they’re spending money right now on a factory, paying their...
  • YDR37 replied to the thread How does the truck bed work?.
    If you watch the first five seconds of the video, the plywood sheets magically materialize in thin air several feet above the truck...
  • k9Hiken replied to the thread What is "Quality Hold" Status.
    mine has gone from 30,42 and now 52 day hold from 5.15.25. No money down to hold it Heritage Blue. I also have them hold a Supersonic...
  • Tallgeese00MS replied to the thread What is "Quality Hold" Status.
    Yeah, I just met with my salesman as my other car was being serviced. He showed that the next allocation of 4Runners aren’t sent to...
  • goodem replied to the thread What is "Quality Hold" Status.
    Any news with their holds? Mine was hit with the 56 day hold (ETA 7/10). I’ve got absolutely zero confidence in this, so as a safety...
 








Top