Tremor Specific Parts Thread

[Aonarch]

So if the Tremor has a different alternator. What is the amp output on that? Does it hold up to water/mud better vs the peasant models? ?

Probably just higher AMP output because of the outfitter switches.

It won't be any better with mud.

Sponsored

 

[Charlesbrown165]

Hi! @renewedcaper took a picture:

How hard is it to remove the grill?

 

[JDowns]

Sorry I cant find the AMP ratings off of a VIN or on any of the online spec sheets I came across. I would think that Ford would want to advertise this more as a selling point.

- Benny

Benny,

If I'm not mistaken the Tremor alternator is 250A.

First Line - HB3T-10300-AA ( Ford Part Number )

On the same sticker in small numbers 12V followed by large numbers ### (amp rating) and just below that "JAPAN" (country of origin). If I'm not mistaken a standard ranger will be marked 150 while the tremor package will be marked 250.

Its very consistent when looking at used parts that most of the Ranger parts out there for 2019-2021 will be -AB (150) and -AA will be (250). If I'm not mistaken the large numbers are how MotorCraft mark the amp rating on the alternators. When I found my backup used alternator I went through this exercise. For example the JB3T from Australia all are marked 210 (Thailand).

Hope that helps.

 

[LevittownFordParts.com]

Hi Jeff,

I think we already established to the Ford service part numbers a few posts earlier with this image

As of right now the Tremor is the only model with Accessory Switches so it would be the bottom number.

- Benny

 

[JDowns]

Benny,

The part number I listed was the part number listed on the sticker on my alternator.

I can try and get in there to take a photo....Its a tight spot.

Regards,

Edit to include photo.

 

[LevittownFordParts.com]

Benny,

The part number I listed was the part number listed on the sticker on my alternator.

I can try and get in there to take a photo....Its a tight spot.

Regards,

Hi Jeff,
The engineering # on the alternator HB3T-10300-AA translates to part # HB3Z-10346-A so we are all good

-Benny

 

[Bob902]

You can't get anything by Benny!

 

[daniel3507]

Do we have the rear shock part numbers yet?

 

[LevittownFordParts.com]

Do we have the rear shock part numbers yet?

Yes I was able to dig them up and a few more suspension parts as well

Suspension
L/F Spring https://parts.levittownfordparts.com/oem-parts/ford-spring-front-hb3z5311b
R/F Spring https://parts.levittownfordparts.com/oem-parts/ford-spring-front-hb3z5310b
Rear Leaf Springs https://parts.levittownfordparts.com/oem-parts/ford-spring-rear-hb3z5560c
Front Shocks https://parts.levittownfordparts.com/oem-parts/ford-shock-absorber-assembly-hb3z18124c
Rear Shocks https://parts.levittownfordparts.com/oem-parts/ford-shock-absorber-assembly-hb3z18125d
Rear Bump Stops https://parts.levittownfordparts.com/oem-parts/ford-bumper-hb3z5k570a

Please let me know if you have any questions.
Thanks,
-Benny

 

[daniel3507]

Dang those rears are expensive! Even more than the front!

 

[Aonarch]

Yes I was able to dig them up and a few more suspension parts as well

Suspension
L/F Spring https://parts.levittownfordparts.com/oem-parts/ford-spring-front-hb3z5311b
R/F Spring https://parts.levittownfordparts.com/oem-parts/ford-spring-front-hb3z5310b
Rear Leaf Springs https://parts.levittownfordparts.com/oem-parts/ford-spring-rear-hb3z5560c
Front Shocks https://parts.levittownfordparts.com/oem-parts/ford-shock-absorber-assembly-hb3z18124c
Rear Shocks https://parts.levittownfordparts.com/oem-parts/ford-shock-absorber-assembly-hb3z18125d
Rear Bump Stops https://parts.levittownfordparts.com/oem-parts/ford-bumper-hb3z5k570a

Please let me know if you have any questions.
Thanks,
-Benny

The shocks all come back as F-150 Raptor shocks in other catalogs.

Is that correct?

 

[LevittownFordParts.com]

The shocks all come back as F-150 Raptor shocks in other catalogs.

Is that correct?

Hi,

I am not seeing this. All of the 21+ F150 rear shocks start with part # ML or NL. HB has been reserved for the Ranger and Ford usually sticks to this part number naming method for each Model.

- Benny

 

[6fords]

First of all, I'm new here. I own a 2021 ranger tremor. As far as output of tremor alternator. I wanted to install a dc to dc charger for my offroad trailer and needed to know the output so as not to overload it. After many calls to different dealerships, I finally found one that the shop manager had a tremor he was doing the same thing to. He said output is 105 amps to 115 amps depending on rpm. Not much huh. Hope this helps.... 6fords

 

[Novaman71]

First of all, I'm new here. I own a 2021 ranger tremor. As far as output of tremor alternator. I wanted to install a dc to dc charger for my offroad trailer and needed to know the output so as not to overload it. After many calls to different dealerships, I finally found one that the shop manager had a tremor he was doing the same thing to. He said output is 105 amps to 115 amps depending on rpm. Not much huh. Hope this helps.... 6fords

 

[Novaman71]

Benny . So they show a part number for new leaf spring U bolts ? I assume they would be different because the multi leaf pack is taller and the stock single leaf u bolts would not be long enough.

Sponsored