Hard Folding Tonneau Covers

[Mellow]

I went with the MX4.. I like it well enough.. however, I had an undercover flex on my Colorado and it was much easier to remove than the MX4... so if I had to do it again, I'd go with the undercover flex but my cover will stay on most of the time so not really that big of a deal... I didn't like the solid fold because I wanted a nice flat look vs the raised cover... just my preference.

Sponsored

 

[Scotty J]

Thanks for feedback.
Starting to look.

Pro-tip: The Lomax is the same one that WeatherTech sells, but Lomax doesn't charge for shipping.

 

[Jerry Caldwell]

Here are some pics of my Lomax. Very satisfied and it removes easily if you need to take it off. The tailgate closes without opening the cover.

 

[Bubbabiker]

I have a Lomax on my F150. Great cover and excellent customer service.

 

[TGinAZ]

Very pleased with my Undercover UltraFlex. Install wasn't the easiest, but once I got it figured out, I am very pleased!

I also had a lot of problems with the install. The instructions are not clear enough and installing the clamps took hours of frustration. After a call to their support line (during normal work hours), I got the clues to the proper location of the shims and clamps. Now that it's successfully installed, I'm also very pleased.

 

[FULLSCALE]

Here are some pics of my Lomax. Very satisfied and it removes easily if you need to take it off. The tailgate closes without opening the cover.

I like to look of that! Any pictures with it open? Does it open fully up to the cab or does if have to be removed to use the whole bed?

 

[Richard Conley]

Leaning toward this.
Looks good. Others have purchased here.

Mine truck just arrived after ordering 5/2. I am getting the Line-x version of this which is the same except it has a Line-x coating on the panels. Having it installed as I could not do it myself

 

[Texasota]

Here are some pics of my Lomax. Very satisfied and it removes easily if you need to take it off. The tailgate closes without opening the cover.

Jerry, do you know what the weight is of your Lomax? A one person job to install/remove?

 

[Jerry Caldwell]

I like to look of that! Any pictures with it open? Does it open fully up to the cab or does if have to be removed to use the whole bed?

It has to be removed to use the whole bed. Removal is easy for two people and could be done alone if needed

 

[Jerry Caldwell]

Jerry, do you know what the weight is of your Lomax? A one person job to install/remove?

Not sure of the weight. It is made of aluminum alloy with a backing frame. It could be removed by one person, but two standing on the ground is easier.

 

[Jerry Caldwell]

Here are some pics of it open.

 

[JTrott]

I got the Bakflip F1 for my supercab. The directions could be a bit better, but overall, for a first time installer, it took about 2.5 hours. It looks great and is about as easy as it gets to do what you need.

 

[fordman89]

I also had a lot of problems with the install. The instructions are not clear enough and installing the clamps took hours of frustration. After a call to their support line (during normal work hours), I got the clues to the proper location of the shims and clamps. Now that it's successfully installed, I'm also very pleased.

Same here! Took a call to their support line for me to get the clamp placement right. Better instructions would have been great in the first place, but I will say their support line was very helpful.

 

[Ron_W]

Not sure of the weight. It is made of aluminum alloy with a backing frame. It could be removed by one person, but two standing on the ground is easier.

I have taken mine off by myself a couple of times. Easy to do.

 

[Ramesh]

I ordered the Gator EFX Cover and expecting it to arrive this week. Will post update and review after the install.
https://realtruck.com/p/gator-efx-hard-fold-tonneau-cover/v/ford/ranger/2019/

Sponsored