Ford Officially Releases Sync 3 v3.4 Build 20282

[royalnewjersey]

Any tricks to getting the XML file to populate? I went through the software install, cycled the ignition, got the prompt that said to unplug USB and that the install was complete. Verified by the new interface, and also the system says "3.4_20282". But when I plug the USB back into the computer there's nothing - just the .gz files.

So I went back out to the truck (3 separate times) and the install just seems to run again. (System updating message on the screen). And every time there's a new "interlog" folder created with the date and time of the newest install. But no xml file ever gets generated...

Sponsored

 

[tmcolegr]

Use the files from the F-150 updater? Can also run another dealer used stock VIN that matches your system, Nav or Non-Nav, and get a new updater.

Yes, I still have the Gracenotes and NA Language Pack files from the F150 that were missing from the Ranger update. I am going to assume the 2019 F150 Platinum and 2019 Ranger XLT Sync 3 v3.4 Build 20282 w/navigation use the same files.

What I don't have is the knowledge of how to edit the Ranger Sync 3 update to be able to go back and install just those 2 missing files.

 

[UofMEngineer]

Yes, I still have the Gracenotes and NA Language Pack files from the F150 that were missing from the Ranger update. I am going to assume the 2019 F150 Platinum and 2019 Ranger XLT Sync 3 v3.4 Build 20282 w/navigation use the same files.

What I don't have is the knowledge of how to edit the Ranger Sync 3 update to be able to go back and install just those 2 missing files.

Yep, if they're both Nav, they're identical. You don't need to edit it, it'll effectively skip over the file that's already there and just update what needs it.

 

[tmcolegr]

Yep, if they're both Nav, they're identical. You don't need to edit it, it'll effectively skip over the file that's already there and just update what needs it.

Ok, so let me check for understanding...

I can just copy the 2 additional files (NA Language Pack and Gracenotes) from the F150 SyncMyRide folder and paste them into the Ranger SyncMyRide folder and perform the entire update all over again and the only files that will be installed are the 2 additional files that weren't previously installed - NA Language Pack and Gracenotes?

Nothing else needs to be done with any of the other files?

 

[UofMEngineer]

Ok, so let me check for understanding...

I can just copy the 2 additional files (NA Language Pack and Gracenotes) from the F150 SyncMyRide folder and paste them into the Ranger SyncMyRide folder and perform the entire update all over again and the only files that will be installed are the 2 additional files that weren't previously installed - NA Language Pack and Gracenotes?

Nothing else needs to be done with any of the other files?

Easier. Just re-use the stick / download you had for the F-150. Since both trucks are NAV, the installer is identical. Then no need to mess with the autoinstall and such.

 

[tmcolegr]

Easier. Just re-use the stick / download you had for the F-150. Since both trucks are NAV, the installer is identical. Then no need to mess with the autoinstall and such.

That sounds too easy...

 

[UofMEngineer]

That sounds too easy...

Nope. You're lucky both are identical NA NAV systems so one drive will update both.

 

[tmcolegr]

Nope. You're lucky both are identical NA NAV systems so one drive will update both.

So why when I look in Oasis on my 2019 Ranger don't I see the current NA Gracenotes file?

I clearly see the NA Gracenotes file on my 2019 F150.

 

[royalnewjersey]

So why when I look in Oasis on my 2019 Ranger don't I see the current NA Gracenotes file?

I clearly see the NA Gracenotes file on my 2019 F150.

FWIW - I only had the 5 files on my Ranger as well. Missing the second "5U5T-XXXXXX" file.

 

[royalnewjersey]

Okay take this with a grain of salt... But I just contacted the Ford customer support asking about the missing XML file. Seems as though the Truck should automatically update the Ford owner website with the new software version after a period of time over-the-air.

Me: Is there was a way on your end to manually tell your system that my truck is indeed on 3.4 20282, without the XML file?
Rep: At this time, there is no way to confirm the update with us. Don't worry, you will still receive future updates. It may take a few days or for your vehicle to travel a certain mileage before it reflects on our end.
Me: So the truck will automatically send that information back to ford over the air? even without me submitting my XML file?
Rep: That is correct. The web page just has not been updated to reflect the new process. I understand that it is confusing.

 

[toddyfunk]

All went smoothly for me. It wasn't available over Wi-Fi but the USB install was simple. 2019 Lariat - climate controls remained. XML file received and uploaded back to Ford. So far so good but haven't yet given it a full test drive test...

 

[gttafoya]

Updated to SYNC3 v3.4.20282.
I did notice that the SiriusXM Travel Link gas prices app shows the station and the distance but the price is missing.

 

[toddyfunk]

I did find a small issue. When I went for a drive I realized Sirius appears as if it wasn't activated. I called Sirius and through the automated system they sent a signal to refresh my subscription and it took like 30 seconds and my stations started working again.

 

[UofMEngineer]

So why when I look in Oasis on my 2019 Ranger don't I see the current NA Gracenotes file?

I clearly see the NA Gracenotes file on my 2019 F150.

No knowledge of the inner workings of that system to say why it'd show on one and not the other.

 

[Geoff]

You're missing the 14G391-CM voice pack, unless you had installed it prior.

Similar situation here. My download does not contain the 14G391-CM package.

The IVSU screen shows my current package as 5U5T-14G391-CL

So, I trust this will need to be updated as well.....how do I find that package?

Sponsored