DMac
Well-Known Member
I have found these, which I think would look good. I know some really don't like the bead-loc look, but I do, especially with the bolt-on look fender flares.Yep, I'm still set on +20 if they'll work. I'm actually going to order the Fuel Shoks from Panda today. Can someone with 0 offset and 33's (Mr. Risk perhaps) let us know how much room you have to the interior of the fender well at full turn in both directions? I've done the math, this setup will for sure clear the spindle. But I'm not sure about any other contact areas at full turn. There's only going to be .78" difference with the +20 offset so as long as there's that much room at least, then we're good. And I guess since Mr. Risk is running 12.5" tires vs the 11.4" I plan to run, the difference is even less.
Maybe one of the tire/wheel guys on here can give some insight into whether they will work without issue.
https://www.4wheelparts.com/p/pro-c...-satin-black-7036-788352/_/R-BKBQ-7036-788352
Pro Comp Series 7036, 17x8 Wheel with 6 on 5.5 Bolt Pattern - Satin Black - 7036-788352
- Wheel Size: 17x8
- Bolt Pattern: 6 on 5.5
- Offset: 18
- Backspacing: 5.25
- Load Range: 2500
- Center Bore: 108
- Finish: Satin Black
Sponsored
Last edited: