I’d try posting this in one of the regional boards. It might get you some more hits since this thread is global.
Not possible without an add on module. That module has been discussed at length in other threads.
No, it’s not possible. Not even through ForScan. You would have to buy a module and install it into the mirrors, but that’s near impossible to find in the US :/
Here's the module people are talking about. Shipping might take forever, but for the features it adds, I think it's worth it.
I confirmed at least 5 times that the chimes location was set back to default power cycled the truck multiple times, drove it around, nothing worked. It refused to switch back no matter what I tried.
That's because the worldwide version has a much simpler as built than the NA version.Hi all, had my first play today with Forscan in my 2020.25 Ranger XLS Sport (Australian model) using the latest version of Forscan, which has the friendly option listing rather than the hex code editing.
An interesting thing is that the climate view in the IPC is fully working in mine. I can change the temperature, and the corresponding change shows up in the climate section of the Sync screen, also changing fan speeds works too. The only thing you can't do is set it back to Auto from that screen.
Thanks for the site, and looking forward to having a bit more play! Turned on off road screen, power distribution, instantaneous fuel use, the climate addition so far, all work as expected. I hoped the option to tilt the mirrors down on reverse would work, but sadly that fails as an incompatible option. Assuming that's also a part of the plug in module for auto-folding mirrors possibly.
Haven't yet delved into the BCM area yet, as that to me is somewhat more risky, so will be doing a lot more reading and backing up before hitting that yet
Dumb what down?
