Anybody planning to lower their 2019 Ranger?

[CBLANCO341]

I've done the lowered 4x4 thing

Wow, beautiful job.

Sponsored

 

[FinalNotice]

Wow, beautiful job.

Thanks. I really enjoyed it. Hope to get another one

 

[SweeneyJr43]

I ordered the Belltech UCA, coilovers & flip kit with there rear shocks. They told me 8-10 weeks, it’s fine because my wheels I ordered are 8-10 weeks out as well. Counting down the days

 

[66F100]

I ordered the Belltech UCA, coilovers & flip kit with there rear shocks. They told me 8-10 weeks, it’s fine because my wheels I ordered are 8-10 weeks out as well. Counting down the days

Keep us posted! I want to hear about your experience with the UCA.

 

[SweeneyJr43]

Keep us posted! I want to hear about your experience with the UCA.

Will do for sure ??

 

[SelfMade]

I lowered my 2019 Lariat roughly 6 months ago using the Belltech kit 2/5. Can't complain, definitely improved the handling in corners, and has a smoother ride, it does bottom out from time to time but Louisiana has the worst roads, now on to searching for some wheels. I ended up buying the smoked led turn signals for the mirrors, and had the taillights and third brake light tinted. Don't have any updated pictures, but will post once i get it cleaned back up.

 

[Doc]

I lowered my 2019 Lariat roughly 6 months ago using the Belltech kit 2/5. Can't complain, definitely improved the handling in corners, and has a smoother ride, it does bottom out from time to time but Louisiana has the worst roads, now on to searching for some wheels. I ended up buying the smoked led turn signals for the mirrors, and had the taillights and third brake light tinted. Don't have any updated pictures, but will post once i get it cleaned back up.

Good Job !

 

[harmond]

I lowered my 2019 Lariat roughly 6 months ago using the Belltech kit 2/5. Can't complain, definitely improved the handling in corners, and has a smoother ride, it does bottom out from time to time but Louisiana has the worst roads, now on to searching for some wheels. I ended up buying the smoked led turn signals for the mirrors, and had the taillights and third brake light tinted. Don't have any updated pictures, but will post once i get it cleaned back up.

Looking good

 

[anoldsman]

I lowered my 2019 Lariat roughly 6 months ago using the Belltech kit 2/5. Can't complain, definitely improved the handling in corners, and has a smoother ride, it does bottom out from time to time but Louisiana has the worst roads, now on to searching for some wheels. I ended up buying the smoked led turn signals for the mirrors, and had the taillights and third brake light tinted. Don't have any updated pictures, but will post once i get it cleaned back up.

Looks great!

 

[66F100]

I lowered my 2019 Lariat roughly 6 months ago using the Belltech kit 2/5. Can't complain, definitely improved the handling in corners, and has a smoother ride, it does bottom out from time to time but Louisiana has the worst roads, now on to searching for some wheels. I ended up buying the smoked led turn signals for the mirrors, and had the taillights and third brake light tinted. Don't have any updated pictures, but will post once i get it cleaned back up.

Great looking truck!
What wheels are you looking to run? There was a member selling a set of 22"x9" from a lowered truck.
How did you tint the tail lights and third brake light? Did it affect your blind spot monitor?

 

[Mirage775]

After loading 15 bags of mulch in the bed, the truck sat level and looked pretty sweet actually! I may drop it another inch in the rear and see how it looks?

Before the pic, it sits like this:

For those of you who do not know, I have about a 3" front drop using Control Freaks kit and currently in the 4" rear drop using Belltech's rear flip kit... I'm thinking I could get away with moving to the 5" drop hole in the rear?

 

[Mirage775]

it does bottom out from time to time but Louisiana has the worst roads.

Yea, the front drop on my truck bottoms out on some bumps/dips/holes around here, where some of the roads/intersections aren't in the best shape... It sounds awful in the cab, but I'm thinking I might have a way to make it sound somewhat better, that I need to get around to trying?

 

[Jwells96]

After loading 15 bags of mulch in the bed, the truck sat level and looked pretty sweet actually! I may drop it another inch in the rear and see how it looks?

Before the pic, it sits like this:

For those of you who do not know, I have about a 3" front drop using Control Freaks kit and currently in the 4" rear drop using Belltech's rear flip kit... I'm thinking I could get away with moving to the 5" drop hole in the rear?

Hey Jason,
Im looking to purchase the 3/6 drop kit from Belltech, just curious on the fitment for your wheels, did the -24 offset pop out too much before putting the fender flares? if I dont do fender flares should I go with less of an offset? -- Beautiful truck and a much inspiration to my future build.

 

[Doc]

Yea, the front drop on my truck bottoms out on some bumps/dips/holes around here, where some of the roads/intersections aren't in the best shape... It sounds awful in the cab, but I'm thinking I might have a way to make it sound somewhat better, that I need to get around to trying?

Adjust your king shocks full compression.

 

[Mirage775]

Adjust your king shocks full compression.

Cool, I'll try that tomorrow! Thanks! I have them set at the "performance" setting, instead of the initial "comfort" setting.

Sponsored