FORScan Crowdsourced Wiki

[landiscarrier]

Just to fill the data base for Hex codes
Corner Light Mode for Fog Lights is
BCM 726-26-01 xxxx x*xx xxxx 0=disabled, 1=enabled

Ok...what is "Corner Light Mode"?

Sponsored

 

[Gizmokid2005]

Ok...what is "Corner Light Mode"?

It activates your fog light based on steering input, similar to how cadillacs have their "corner lights" that come on with the turn signals.

 

[landiscarrier]

It activates your fog light based on steering input, similar to how cadillacs have their "corner lights" that come on with the turn signals.

Hmmmm I just upgraded to the SS3 fogs from Diode Dynamics.....I guess it would still work with them.

my Focus ST had the headlights that turned with steering input, I loved those!

 

[Gizmokid2005]

Hmmmm I just upgraded to the SS3 fogs from Diode Dynamics.....I guess it would still work with them.

my Focus ST had the headlights that turned with steering input, I loved those!

It would, it just controls the power to the lights individually, so it doesn't matter the bulbs/housings you have.

I don't understand why more companies don't introduce turning headlights, it would be so much safer and clearly the tech is there.

 

[gfitzge2]

my Focus S T had the headlights that turned with steering input, I loved those!

My Focus has them too. When I drive a curvy road especially if it is up hill the turning headlights are very pronounced. I always get a chuckle out of them. It looks like the car has eyes looking around the corner.? ?

 

[micl9]

Do the corner lights only work when headlights are on ?

Yes

 

[txquailguy]

I have the corner light function on my 2020 Hyundai Kona Ultimate and love it! I enabled corner lights for fogs last night in FORScan on the Ranger but have yet to test it out to see that it works.

 

[txquailguy]

Our 2019 Hyundai Santa Fe Ultimate doesn't have this. Previous two Tucsons did.

Tell you what....for $28,5K that Kona Ultimate is a heck of a deal! It has EVERYTHING on it. Including that camera/radar setup with pedestrian monitoring...lol. Man it even has a HUD (Heads Up Display) that comes up out of the dash. You can hit a button and make it vanish...lol. Very fun to drive! I've said this in here before....I bought the Ranger for me and the Kona for her.....guess who daily drives my Ranger

 

[txquailguy]

I have the corner light function on my 2020 Hyundai Kona Ultimate and love it! I enabled corner lights for fogs last night in FORScan on the Ranger but have yet to test it out to see that it works.

Yes it works, but the led headlights on my Lariat are so bright you don’t see it much.

 

[immersion]

You'll be fine with FORScan, since it's only modifying config values to your modules. It's not actually flashing anything that could be harmful to the vehicle. Just make sure you take backups of your modules before making any changes with FORscan and you should be 100% fine.

Fantastic! Thank you for the fast response. I assume that means there is not need to revert back if I need to install a software update.

Note: I removed my questions from this thread because I thought it was the wrong thread. I re-posted them in the FORScan Modification thread.

 

[Gizmokid2005]

Fantastic! Thank you for the fast response. I assume that means there is not need to revert back if I need to install a software update.

Note: I removed my questions from this thread because I thought it was the wrong thread. I re-posted them in the FORScan Modification thread.

I've posted my answer over there as well.

Correct, you do not need to revert. I just updated from 20136 to the 20282 build this weekend without issues.

 

[Gizmokid2005]

Sorry for the long delay everyone, it's been quite the past few months.

I have finally updated the wiki post to be a table format, trying to link together AS-BUILT and GUI options together, and putting them in an alphabetical list, roughly, as well as trying to provide descriptions if possible. Hopefully this helps keep it clean and helps others find things they're looking for.

To those who have contribute, which I'm tagging below, I would be very appreciative if you would take the time to verify the settings you've contributed to ensure I didn't completely mangle them when updating, and for those that don't have a description, if you would add one, that would be awesome.

Thanks to everyone for their contributions so far!

@RCMUSTANG
@Porpoise Hork
@Akshon
@gfitzge2
@John Galt
@j0shm1lls
@Arron
@WhiteLightning19
@Ed Venture

 

[PltFX4]

Well done!!! Thank you!

 

[RCMUSTANG]

Sorry for the long delay everyone, it's been quite the past few months.

I have finally updated the wiki post to be a table format, trying to link together AS-BUILT and GUI options together, and putting them in an alphabetical list, roughly, as well as trying to provide descriptions if possible. Hopefully this helps keep it clean and helps others find things they're looking for.

To those who have contribute, which I'm tagging below, I would be very appreciative if you would take the time to verify the settings you've contributed to ensure I didn't completely mangle them when updating, and for those that don't have a description, if you would add one, that would be awesome.

Thanks to everyone for their contributions so far!

@RCMUSTANG
@Porpoise Hork
@Akshon
@gfitzge2
@John Galt
@j0shm1lls
@Arron
@WhiteLightning19
@Ed Venture

I think it's right for me. Lol

 

[Ds_2020Ranger]

Ive never used FORscan before, but I assume its like just connecting an OBDII scanner.

Hook connector up to truck and laptop, turn truck to on position and open FORscan?

Sponsored