Sponsored

Aftermarket Wheel Picture Thread

OP
OP
arbjosh

arbjosh

Well-Known Member
First Name
Josh
Joined
Feb 25, 2021
Threads
21
Messages
163
Reaction score
174
Location
Denver, CO
Vehicle(s)
2021 Ranger Fx4
Occupation
Arborist
I get what you're trying to do, and it would be a useful thread -- I'll add my pics here when I have the Vector 6s on. I think all that most any of us are (or were) after when shopping wheels were pics and info on the wheel / tire combo, offset / backspacing info of the wheels, and how much lift (if any) was added for reference. Useful pics including how much the wheel / tire combo poked out past the fender flares and if the combo rubbed on anything were good, mainly so we'd know how much we were going to be spending later on related items..
Thanks for the support to those who understand. Here was my first attempt:

https://www.ranger5g.com/forum/threads/fitment-picture-thread.11767/

It started gaining traction but fell down the thread list as new "will this fit my ranger" threads started piling on. Check it out though, there is still some good info there. Directions moderately followed.
Sponsored

 

JACKSMYDOG

Well-Known Member
First Name
Jay
Joined
May 8, 2021
Threads
36
Messages
2,012
Reaction score
6,194
Location
Ontario
Vehicle(s)
2020 Ranger Lariat FX4 Black
Occupation
Retired
Prefer this one from Socal Garage Works,

1624255261722.webp
LOL

My post was sarcasm because this thread devolved so fast and far.

With that said, You couldn't pay me enough to put that or the Sparco in my Ranger (or a Solstice ;) )
 
OP
OP
arbjosh

arbjosh

Well-Known Member
First Name
Josh
Joined
Feb 25, 2021
Threads
21
Messages
163
Reaction score
174
Location
Denver, CO
Vehicle(s)
2021 Ranger Fx4
Occupation
Arborist
I think this would be my first choice of after market wheel.

Sparco Suede biotches

pmGC6sb.png
I'll join in on posting. Trying to get my humor back.
Do you think this wheel would rub the legs when turning? Do you think a 6 inch spacer would bring it far enough away so that it doesn't rub?
 

JACKSMYDOG

Well-Known Member
First Name
Jay
Joined
May 8, 2021
Threads
36
Messages
2,012
Reaction score
6,194
Location
Ontario
Vehicle(s)
2020 Ranger Lariat FX4 Black
Occupation
Retired
I'll join in on posting. Trying to get my humor back.
Do you think this wheel would rub the legs when turning? Do you think a 6 inch spacer would bring it far enough away so that it doesn't rub?
Many years ago when I was being trained on a street sweeper, the instructor was real big @ 6'4", 375#-ish. They were dual driver set-up, and I had to tell him constantly to get his belly off the wheel so I could turn.

Thanks for the memory lol.
 


SegFault

Well-Known Member
First Name
Jeff
Joined
Dec 24, 2020
Threads
2
Messages
75
Reaction score
266
Location
OK
Vehicle(s)
2020 Ranger Lariat
Occupation
Industrial Sanitation Engineer, Cloud DevOps
Thanks for the support to those who understand. Here was my first attempt:

https://www.ranger5g.com/forum/threads/fitment-picture-thread.11767/

It started gaining traction but fell down the thread list as new "will this fit my ranger" threads started piling on. Check it out though, there is still some good info there. Directions moderately followed.
That's one of the good information and pic threads I looked through when I was searching. And you're right, a thread falls off, another thread starts, wash-rinse-repeat.
 

JACKSMYDOG

Well-Known Member
First Name
Jay
Joined
May 8, 2021
Threads
36
Messages
2,012
Reaction score
6,194
Location
Ontario
Vehicle(s)
2020 Ranger Lariat FX4 Black
Occupation
Retired
I could speak to tires and rims for days, I think their importance is often under-rated. My vehicle is designed for solo and secluded rough roads and trails. I don't care about mpg, or road characteristics on these tires and rims, just off-road capability and durability.

I have Duratrak LT 285/70-17, 10 ply because IMO they are the best off-road oriented in the ALL-Terrain category. KO2, Wildpeak, Open Country, Grapplers, Grabbers, etc all have their merits, but none perform better off-road, and that was my priority for these.

Rims... I limited my search to: Black 17x 7.5to8.5, 139.7 x 93.1 and +35 to +40. The options were very few, but I chose RWC 360 because they fit and look okay. Not the best looking rim, but specs are perfect, and that was more important.

All 6 are Ford TPMS and yesterday I rotated for the first time at 5,000 km. Good wear on the 4 used, now both spares are on for the first time, and all is well. Balance is good, both TPMS sensors kicked in.

My factory rims (black pack 18s) are as they came still with AT/M tires. I will rotate those rims on seasonally or as convenient. A good floor jack, and cordless impact makes it a 15 minute job to change all 4.

IO4zoCb.jpg

UkyrioN.jpg


34CNgAd.jpg
 

Ranger2021

Well-Known Member
Joined
Mar 2, 2021
Threads
5
Messages
158
Reaction score
463
Location
KY
Vehicle(s)
21 Tremor.
Wheels are XD RockStar's. 17x8 x 35mm offset. Tires are 285/70/17 Falken Wildpeak MT's.
They do not stick out beyond my flares. No spacers. 1/2 inch lift and Ready Lift crash bars.
1624299462046.webp
 

SegFault

Well-Known Member
First Name
Jeff
Joined
Dec 24, 2020
Threads
2
Messages
75
Reaction score
266
Location
OK
Vehicle(s)
2020 Ranger Lariat
Occupation
Industrial Sanitation Engineer, Cloud DevOps
265/70/R17 Cooper AT3s on Icon Vector 6s (17 x 8.5, +25mm offset, titanium color), FP 2.0 kit.

IMG_3008_c.jpg


IMG_3012.jpg


IMG_3005.jpg
 

Bdem62

Well-Known Member
First Name
Kevin
Joined
May 15, 2021
Threads
15
Messages
55
Reaction score
144
Location
Iowa
Vehicle(s)
2022 Ford Ranger Lariat Tremor
Occupation
Director, Safety Division
Wheel: Vision Warrior, 18x8.5, +25 Offset
Tires: Toyo Open Country AT/3, 265/70R18
Ready Lift Ant-intrusion Beams, no rubbing

D2B95DAD-37FD-4526-9711-3CDC6CCD915F.jpeg


59389328-C9DB-4EEA-9654-AC3F684A6DB3.jpeg


5057F650-98A3-45D0-9A3E-F84133F04823.jpeg
Sponsored

 
 








Top