Tried To Install Them On My 2023 Lariat……

[RK Racing]

Went to the local hole in the wall tire place near me today and they stated after they tried to install them that I need more than my 3.5” lift. They said I might need a 6 inch lift with cut fenders or 8 inch lift with uncut fenders. They only wanted 50 bucks per fender to cut, but said I would have to get them repainted afterwards. Still pondering my choices……… 40”x 13.5”…………

Sponsored

 

[5thranger]

Went to the local hole in the wall tire place near me today and they stated after they tried to install them that I need more than my 3.5” lift. They said I might need a 6 inch lift with cut fenders or 8 inch lift with uncut fenders. They only wanted 50 bucks per fender to cut, but said I would have to get them repainted afterwards. Still pondering my choices……… 40”x 13.5”…………

Looks good the way it is.

 

[Bob902]

Looks good the way it is.

Agreed

 

[NotBudule2]

Only 50 bucks per fender and they will take a Sawzall to it and make those fit ? Start a go fund me and I'll pay for 1 fender maybe 2 if you post the pics...

 

[RK Racing]

Only 50 bucks per fender and they will take a Sawzall to it and make those fit ? Start a go fund me and I'll pay for 1 fender maybe 2 if you post the pics...

Thanks Bro!

 

[KJRR]

Only 50 bucks per fender and they will take a Sawzall to it and make those fit ? Start a go fund me and I'll pay for 1 fender maybe 2 if you post the pics...

Hell, I'll supply the Sawzall, paint, rollers and brushes. Let's get to it.

 

[LB'sTremor]

jeezus what do those things weigh?

LB

 

[Rp930]

It will be the slowest Ranger on the planet.

 

[Dr. Zaius]

Wow.

Is there enough metal to cut to get those to fit?

I would almost think you'd need to go to some fiberglass desert racer fenders and bedsides to run those.

 

[AzScorpion]

At this point just go all out!........

 

[got3fords]

Hell, I'll supply the Sawzall, paint, rollers and brushes. Let's get to it.

I see a Youtube vid coming.

 

[KJRR]

I see a Youtube vid coming.

Stay tuned to the Redneck thread for future updates....

 

[Av8or1]

Is this going to be a pavement princess? If not there is no way the stock ranger axle can handle a 40" tire with any real world usage. You'll need to throw a Dana 60 on the rear end, or maaaaybe you can get away with some chromeoly half shafts.

As for the front end I think you'll have to make some custom mods to keep the halfshafts from snapping.

Also plan to re-gear your differentials, and maybe transfer case.

EDIT: Missed the joke. I'm too much of an engineer.

 

[bmidd]

That's going to look great at the Cars & Coffee & Mall Crawlerz meet.

 

[Av8or1]

That's going to look great at the Cars & Coffee & Mall Crawlerz meet.

Sponsored