Shrockworks Stock Bumper Winch Mount

[TBR17]

Posting a new thread so this doesn’t get buried in the winch capable bumper thread. I was at Shrockworks last week and let them run their final test fit for their stock bumper winch Mount on my truck. Here are pics for anyone in the market for one of these. They’ll have it up on their site any day now. Fit is amazing and the lower shackle mounts are a nice addition to the stock bumper.

Great looking and well concealed. Makes me wish I didn't have the adaptive cruise control and off road cruise control. That black box is in the way.

Sponsored

 

[HoosierT]

Great looking and well concealed. Makes me wish I didn't have the adaptive cruise control and off road cruise control. That black box is in the way.

Easy fix, I have those options too.
https://www.ranger5g.com/forum/threads/fab-fours-acc-relocation-bracket-installed.5811/

 

[TBR17]

Easy fix, I have those options too.
https://www.ranger5g.com/forum/threads/fab-fours-acc-relocation-bracket-installed.5811/

Much appreciated!!!!!

 

[emkeiz]

I got mine this week and installed yesterday. Took a lot of effort and the instructions are not great. Had to redo some work I could have avoided with the right order of operations.

I paired it with a warn Xeon and it fits snugly. I had to mount it on the plate before lifting it into place because the winch wouldn’t pass the front plates. Very happy with the quality.

Also it definitely sits closer to the bumper then I thought. Mine squishes the license plate.

@ac_perks any idea how to install the ACC mount? I bought it but it didn’t come with any instructions so left it out for now.

I put a warn zeon in mine as well... had to trim the clutch hande to fit between the frame rails

 

[overland_dog]

Does this work with the factory skid plate? Or do they make one specifically for it?

 

[ac_perks]

Does this work with the factory skid plate? Or do they make one specifically for it?

Yes, there's brackets that they'll send you to attach to the FX4 skid if you specify that when you order.

 

[103]

Any idea if this would work with the ARB skid plates without having to cut the plates?

 

[Frenchy]

Any idea if this would work with the ARB skid plates without having to cut the plates?

Possible but no promises

 

[2020 Ranger]

Any idea what the cost may be? It looks good. I'm interested.

Mine was 1295 with all options. Powder coat, sensor holes, ACC relocation

 

[ksuds49]

Anyone do a pull with their winch mounted to this yet?

 

[Nevada Brian]

OP - Thanks for the original post. I found this post just before ordering a hidden mount, and now am on the wait "2 to 3 months" for it to be build and shipped.

 

[JesseS]

Sure you could.. but there's quite a bit going on. For $500 I don't think you can go wrong.

Hidden Winch Mount

Ranger Hidden Winch Instructions

This is what I would need, I like the Shockworks but I need to keep the OM tow loops, which are now fitted with RV tow connectors.

 

[TRD-2-Tremor]

Posting a new thread so this doesn’t get buried in the winch capable bumper thread. I was at Shrockworks last week and let them run their final test fit for their stock bumper winch Mount on my truck. Here are pics for anyone in the market for one of these. They’ll have it up on their site any day now. Fit is amazing and the lower shackle mounts are a nice addition to the stock bumper.

This is exactly what I’ve been searching for!! Thanks for sharing!

 

[ProtonDecay]

This is exactly what I’ve been searching for!! Thanks for sharing!

Great bumper - has saved my bacon more than once on the trail. Took one of the "shortcuts" coming back out of Toquerville Falls two weeks back and came off a ledge wrong. Truck landed square on the left shackle mount and came away with naught but a scratch on the front of the mount. Solid. Make sure to trim as needed to avoid crimping the AC condenser line.

 

[TRD-2-Tremor]

Great bumper - has saved my bacon more than once on the trail. Took one of the "shortcuts" coming back out of Toquerville Falls two weeks back and came off a ledge wrong. Truck landed square on the left shackle mount and came away with naught but a scratch on the front of the mount. Solid. Make sure to trim as needed to avoid crimping the AC condenser line.

Thanks Brother!!!

Sponsored