Removable Dash Tray (3d print)

[daczone]

Uploaded to Thingiverse

As part of my gauge pods I needed a tray to attach them to and thought.... it might be nice to have a removable tray.

Sponsored

 

[Msfitoy]

Uploaded to Thingiverse

As part of my gauge pods I needed a tray to attach them to and thought.... it might be nice to have a removable tray.

Very nice...did you have the OEM tray scanned? I wish my printer was large enough to make this in one piece...

 

[Uphill1]

That looks great! What would it take to get one?

 

[daczone]

Very nice...did you have the OEM tray scanned? I wish my printer was large enough to make this in one piece...

Never had good luck scanning things, I drew this in CAD. It fits real nice. And as mentioned it's the bottom of my 4 gauge upper half. I curved the flanges to fit to the OEM cover, though it could be made as a OEM replacement.

 

[daczone]

That looks great! What would it take to get one?

It's on Thingiverse... Just download and print. If you don't have a 3D printer you could outsource one. there are lots of places to do that. NOTE: You'd want to us filament that can handle the UV and heat.

https://www.filamentive.com/best-3d-printing-filament-for-outdoors-uv-resistance-guide/

 

[Msfitoy]

It's on Thingiverse... Just download and print. If you don't have a 3D printer you could outsource one. there are lots of places to do that. NOTE: You'd want to us filament that can handle the UV and heat.

https://www.filamentive.com/best-3d-printing-filament-for-outdoors-uv-resistance-guide/

You must have a pretty large printer...this is too big for my Ender 3 to print in one piece...

 

[daczone]

You must have a pretty large printer...this is too big for my Ender 3 to print in one piece...

I've got a few: Creality Ender 3 and a Creality CR10, but they are JUNK compared to my Bambu Lab X1-Carbon. It makes them look like toys! The X1 is all I use now.

I just uploaded the STEP file and did a quote from PCBWAY
$10.71 for Resin
$21.16 for Nylon
$21.16 for ABS
$38.09 for ASA
$121.52 for Aluminum
$236.62 for Stainless Steel

 

[ctechbob]

You must have a pretty large printer...this is too big for my Ender 3 to print in one piece...

It will fit on an Ender 3, unless they made a smaller version somewhere along the line:

 

[Msfitoy]

It will fit on an Ender 3, unless they made a smaller version somewhere along the line:

That's odd...I have an Ender 3 S1 with 220 x 220 x 270 tall build box but doesn't fit in Cura slicer...

 

[ctechbob]

That's odd...I have an Ender 3 S1 with 220 x 220 x 270 tall build box but doesn't fit in Cura slicer...

Well, that's odd. mine is set the same

 

[Msfitoy]

Well, that's odd. mine is set the same

Arrrrggggg...

Edit...I figured out why...I need to turn off adhesion skirt off...duh

 

[ctechbob]

Yep, don't need it for this one for sure.

Fwiw, cura didn't slice the 'ranger' properly on mine for some reason, might want to look at the gcode output.

 

[got3fords]

Where does this tray go, on top center dash? I am not understanding what purpose it serves. Thanks!

 

[Msfitoy]

Where does this tray go, on top center dash? I am not understanding what purpose it serves. Thanks!

OP designed this as a drop in and I think it serves as a base to his gauge pod...not sure how they go together...

 

[DukeCanBuildit]

Where does this tray go, on top center dash? I am not understanding what purpose it serves. Thanks!

James, I was thinking the same thing. What’s it for? Does it just drop in? How is it different than what’s already there? If it’s simply a tray liner, what’s the point? Then, it dawned on me…

Ford Ranger Poutine Tray

* closes 5g to search the interwebs for Thingiverse

Sponsored