Remote Transmission Dip Stick Aftermarket Support?

[Superspirit]

Count me in still. Not sure where I fall anymore but when available I'll be getting one.

Sponsored

 

[The Last Ranger]

I do need to add in the price has changed, it was my goal to bring it cheaper.

It will be $179.00

Yup I'm in as well, just say when!!!!!!!!!

 

[stinkechin]

i still in ready and waiting

 

[Grumpaw]

Still in for one !!!

 

[Utope]

@Fitzmotor Finish line in sight. Must be an exciting time. Just curious, what is your estimated install time?

 

[Trigganometry]

Just take my money bro! ?

 

[Msfitoy]

The only info we have on each other is our 5G identity, I will send out PM's.

So, please be good with how I do this, I have mentioned before, that I was unaware of the voting list and how it's random anyways, I needed to come up with something.

So, the easiest and most logical list, was simply: the order of posts requesting one.

It's the order that is easiest to follow, it's straight forward, and it's viewable, I'm sure there are people who voted early and never posted anything, to those I apologize, and there are people who didn't make it crystal clear but I included.

There is a very important second reason for handling it this way, in those first 20+ pages of post, is the very thing that motivated me through this project, all those positive comments set me on a path.

The encouragement was enough for me to do it properly, start a business, get everything in place, meet all requirements, register to all kinds of stuff, set up accounts, pay all fees, it's gnarly, but a good experience as well.

Thanks to everyone.

So back to business, I will send out group PM's soon, let me know if you are still interested.

I think this batch should be 27 assembly's, time to get busy, middle of next week hopefully, and I'm still not done with the instructions.

Go figure.. water heater started leaking, "building hoses today? no, I'm a plumber today"

Only got a handful of them, not the whole order, time to get to work.

I was stoked to find out they were all within less than an 1/8 of an inch from each other.

I will only have 20ish to go out, I don't have the instructions done yet

Looking forward to this Mike...seems like the time of year for plumbing issues...our washer needed a overhaul...first time for everything...took me a couple of evenings and $150 worth of parts but it's like new again...

 

[Andrew27]

The only info we have on each other is our 5G identity, I will send out PM's.

So, please be good with how I do this, I have mentioned before, that I was unaware of the voting list and how it's random anyways, I needed to come up with something.

So, the easiest and most logical list, was simply: the order of posts requesting one.

It's the order that is easiest to follow, it's straight forward, and it's viewable, I'm sure there are people who voted early and never posted anything, to those I apologize, and there are people who didn't make it crystal clear but I included.

There is a very important second reason for handling it this way, in those first 20+ pages of post, is the very thing that motivated me through this project, all those positive comments set me on a path.

The encouragement was enough for me to do it properly, start a business, get everything in place, meet all requirements, register to all kinds of stuff, set up accounts, pay all fees, it's gnarly, but a good experience as well.

Thanks to everyone.

So back to business, I will send out group PM's soon, let me know if you are still interested.

I think this batch should be 27 assembly's, time to get busy, middle of next week hopefully, and I'm still not done with the instructions.

Go figure.. water heater started leaking, "building hoses today? no, I'm a plumber today"

Only got a handful of them, not the whole order, time to get to work.

I was stoked to find out they were all within less than an 1/8 of an inch from each other.

I will only have 20ish to go out, I don't have the instructions done yet

I’m for sure still interested!!

 

[Stevedbvik1]

Looking forward to this Mike...seems like the time of year for plumbing issues...our washer needed a overhaul...first time for everything...took me a couple of evenings and $150 worth of parts but it's like new again...

Your shoes are way too organized

 

[BS67]

Still in for one here! No hurry though, just add me on and let me know!

 

[Racket]

I do need to add in the price has changed, it was my goal to bring it cheaper.

It will be $179.00

Still cheaper than the (inferior) B&M model. A no brainer.

 

[Msfitoy]

Your shoes are way too organized

lol...that's a mess...

 

[Fitzmotor]

@Fitzmotor Finish line in sight. Must be an exciting time. Just curious, what is your estimated install time?

To install the stick?, I have it down to 3 minutes, but I've done it a hundred times probably, but really, it's a 10 minute job maybe, because all you do is pop on the U clip, pull the stock stick, install the fitting, wiggle in the extended stick, start the fitting, bolt down the bracket, tighten fitting.

But, I just got back with the new water heater and a burger, then get it installed and move on to hoses.

 

[Bsqrd]

The only info we have on each other is our 5G identity, I will send out PM's.

So, please be good with how I do this, I have mentioned before, that I was unaware of the voting list and how it's random anyways, I needed to come up with something.

So, the easiest and most logical list, was simply: the order of posts requesting one.

It's the order that is easiest to follow, it's straight forward, and it's viewable, I'm sure there are people who voted early and never posted anything, to those I apologize, and there are people who didn't make it crystal clear but I included.

There is a very important second reason for handling it this way, in those first 20+ pages of post, is the very thing that motivated me through this project, all those positive comments set me on a path.

The encouragement was enough for me to do it properly, start a business, get everything in place, meet all requirements, register to all kinds of stuff, set up accounts, pay all fees, it's gnarly, but a good experience as well.

Thanks to everyone.

So back to business, I will send out group PM's soon, let me know if you are still interested.

I think this batch should be 27 assembly's, time to get busy, middle of next week hopefully, and I'm still not done with the instructions.

Go figure.. water heater started leaking, "building hoses today? no, I'm a plumber today"

Only got a handful of them, not the whole order, time to get to work.

I was stoked to find out they were all within less than an 1/8 of an inch from each other.

I will only have 20ish to go out, I don't have the instructions done yet

Not sure where I am on the list, but I will definitely purchase one when my position in line arrives.

 

[Stevedbvik1]

To install the stick?, I have it down to 3 minutes, but I've done it a hundred times probably, but really, it's a 10 minute job maybe, because all you do is pop on the U clip, pull the stock stick, install the fitting, wiggle in the extended stick, start the fitting, bolt down the bracket, tighten fitting.

But, I just got back with the new water heater and a burger, then get it installed and move on to hoses.

Water heater replacement would be a two burger minimum for me

Sponsored