Help, Quick Question: torque spec wheel lug nuts

[subquark]

I dunno what I torque to, I just put the 1/2" Ingersoll Rand 2235 on 3 out of 4, and blast away! =D

LOL, I have used a torque wrench when doing the rear shocks and that setting is pretty close. Max torque is 930 ft-lbs and up to 1,350 ft-lb nut-busting torque! =p

I'll always be able to take off my beefy nuts.

I'm on 3/8" lines so I imagine the published settings are on half inch.

You know you're not going too hard if you don't have either of these situations:

Sponsored

 

[5thranger]

I dunno what I torque to, I just put the 1/2" Ingersoll Rand 2235 on 3 out of 4, and blast away! =D

LOL, I have used a torque wrench when doing the rear shocks and that setting is pretty close. Max torque is 930 ft-lbs and up to 1,350 ft-lb nut-busting torque! =p

I'll always be able to take off my beefy nuts.

I'm on 3/8" lines so I imagine the published settings are on half inch.

You know you're not going too hard if you don't have either of these situations:

When you have beefy nuts, you do what you have to do.

 

[AzScorpion]

When you have beefy nuts, you do what you have to do.

What do you do when you have stick nuts.

 

[AzScorpion]

Stand clear! I'm about to rotate my wheels, neighbors...

Just do it at night with all your lights on. That way it'll blind them and they'll never see it coming! ?

Sponsored