JACKSMYDOG
Well-Known Member
- Thread starter
- #1
Factory Black 2020 Ranger Lariat FX4 with Black Appearance Package.
From the dealer:
-3.5 inch lift
-Warn Ascent front bumper
-Warn 12S winch
-Westin Skid plates
-Dash cam
-Swing out tool box left side
-Mishimoto cold air intake (now removed)
-Magnaflo 3" exhaust (now removed)
After I picked up the truck, I gave all the details and receipts to the insurance company and they wouldn't cover the intake/exhaust as "high performance" upgrades. My policy renews in September, so the easiest thing to do was re-install the factory parts for now, and shop around this summer.
By me since delivery:
-DaimondBack HD smooth installed, holding off on tie downs until custom back rack is complete
-6 pack of RWC 360 rims wrapped in LT 285/70-17 Duratrak 10 ply all with Ford TPMS
-Rigid Radiance Amber Backlit 30" light bar arrived, and new mounts completed today, ready for install once S2 arrive
-peeled the FX4 stickers
-blacked front and rear FORD emblems
Back seats have been removed, and new bench/cabinets being worked out as parts arrive.
Parts here & waiting for install:
-N-Fab TrailSliders
-S-Pod Bantam touch screen
-Rigid Radiance Amber Backlit 30" light bar
-KC Highlites Cyclone Under-hood Light Kit (under hood)
-KC Highlites Cyclone Under-hood Light Kit (under DiamondBack)
-Firestik FS5 antenna
-Auto Ventshade Aeroskin Lightshield Hood Protector
-Auto Ventshade Low Profile Ventvisor
Parts on order, not here yet:
-KC HighLites Cyclone Rock lights x 8
-Rigid Radiance Scene flush mount reverse lights
-Eliminaator 4000W SW Inverter
-Cobra 75 WX ST CB
-Secondary 12V system
-Custom BackRack
-Eliminator 4000W SW Inverter
-Oracle Truck Bed Light Kit
-Console tray
-Console pad
Still to be scheduled or completed:
-Prinsu Roof Rack, Thule DockGrip, Thule Portage, Thule Highlift Jack mount all going on order first thing tomorrow morning.
-150 Liter fuel tank. My welder is booked solid, and waiting for checker plate as well, may start looking for options this week.
-Canoe rack to mount to DiamondBack. Maybe scratching this if Prinsu roof rack and systems work out. Speaking to them tomorrow.
-Dual spare carrier for DiamondBack
-Tint for 4 door windows, and opaque black vinyl wrap for the outside of rear window.
I'm sure I am missing things, but that is the majority of it for now.
It's going to be a cross country touring machine, mostly about back-country access more so than off-roading. It's over built for the purpose, but I do allot of solo tripping in the most remote locations.
Factory black 18" rims have the Dynapro AT/M All-weather, all terrain tires. I'm having them flipped to white lettering in, then I'll have them for local seasonal use, saving on the Duras, fuel and noise. Dynos are 30.6" Duras are 32.7".
From the dealer:
-3.5 inch lift
-Warn Ascent front bumper
-Warn 12S winch
-Westin Skid plates
-Dash cam
-Swing out tool box left side
-Mishimoto cold air intake (now removed)
-Magnaflo 3" exhaust (now removed)
After I picked up the truck, I gave all the details and receipts to the insurance company and they wouldn't cover the intake/exhaust as "high performance" upgrades. My policy renews in September, so the easiest thing to do was re-install the factory parts for now, and shop around this summer.
By me since delivery:
-DaimondBack HD smooth installed, holding off on tie downs until custom back rack is complete
-6 pack of RWC 360 rims wrapped in LT 285/70-17 Duratrak 10 ply all with Ford TPMS
-Rigid Radiance Amber Backlit 30" light bar arrived, and new mounts completed today, ready for install once S2 arrive
-peeled the FX4 stickers
-blacked front and rear FORD emblems
Back seats have been removed, and new bench/cabinets being worked out as parts arrive.
Parts here & waiting for install:
-N-Fab TrailSliders
-S-Pod Bantam touch screen
-Rigid Radiance Amber Backlit 30" light bar
-KC Highlites Cyclone Under-hood Light Kit (under hood)
-KC Highlites Cyclone Under-hood Light Kit (under DiamondBack)
-Firestik FS5 antenna
-Auto Ventshade Aeroskin Lightshield Hood Protector
-Auto Ventshade Low Profile Ventvisor
Parts on order, not here yet:
-KC HighLites Cyclone Rock lights x 8
-Rigid Radiance Scene flush mount reverse lights
-Eliminaator 4000W SW Inverter
-Cobra 75 WX ST CB
-Secondary 12V system
-Custom BackRack
-Eliminator 4000W SW Inverter
-Oracle Truck Bed Light Kit
-Console tray
-Console pad
Still to be scheduled or completed:
-Prinsu Roof Rack, Thule DockGrip, Thule Portage, Thule Highlift Jack mount all going on order first thing tomorrow morning.
-150 Liter fuel tank. My welder is booked solid, and waiting for checker plate as well, may start looking for options this week.
-Canoe rack to mount to DiamondBack. Maybe scratching this if Prinsu roof rack and systems work out. Speaking to them tomorrow.
-Dual spare carrier for DiamondBack
-Tint for 4 door windows, and opaque black vinyl wrap for the outside of rear window.
I'm sure I am missing things, but that is the majority of it for now.
It's going to be a cross country touring machine, mostly about back-country access more so than off-roading. It's over built for the purpose, but I do allot of solo tripping in the most remote locations.
Factory black 18" rims have the Dynapro AT/M All-weather, all terrain tires. I'm having them flipped to white lettering in, then I'll have them for local seasonal use, saving on the Duras, fuel and noise. Dynos are 30.6" Duras are 32.7".
Sponsored
Last edited: