BuiltRight Industries Dash Mount

[daniel3507]

My bulletpoint mount

I think I prefer this one to the Built Right. This seems to leave more of the tray open and usable

Sponsored

 

[dondonbabyraptor]

I think I prefer this one to the Built Right. This seems to leave more of the tray open and usable

Not really that much useable space only for thin things. I have the bulletpoint one. I do enjoy the flag designs in the phone mount and tray

 

[daniel3507]

If it can hold sunglasses I'll be happy. I tend to throw them on the dash rather than the holder

 

[the5Gmartian]

Yeah you should be able to fit some glasses in there with it. I have been very impressed by Bulletpoint and their customer service. They have been very quick to respond and extremely helpful. I highly recommend

 

[NC_LFX4]

I thought my clearance issue was towards the windshield, but it was actually away from the windshield. I fought with it for about an hour until I notched farther forward. Fell right in to place after that.

I'm puzzled. What's the clearance issue? My problem is the the front clips are not engaging no matter how much I press
[/QUOTE]

I’m having the same problem as you. Even before I installed the tray, the front clips wouldn’t engage no matter what I did. About to have to order a new one from Levittown and hope for better luck on the second attempt…

 

[Colo_Ranger]

I'm puzzled. What's the clearance issue? My problem is the the front clips are not engaging no matter how much I press

I’m having the same problem as you. Even before I installed the tray, the front clips wouldn’t engage no matter what I did. About to have to order a new one from Levittown and hope for better luck on the second attempt…
[/QUOTE]

put the front clips in first and rotate back as you press down.

 

[NC_LFX4]

I’m having the same problem as you. Even before I installed the tray, the front clips wouldn’t engage no matter what I did. About to have to order a new one from Levittown and hope for better luck on the second attempt…

put the front clips in first and rotate back as you press down.
[/QUOTE]

I think I finally got it, I may have messed up the part of the tray the blu clips attach to though. This past from Levittown is the replacement part for the tray, correct?

https://parts.levittownfordparts.com/oem-parts/ford-finish-panel-kb3z2104338aa

 

[Colo_Ranger]

It appears so. I had to replace my tray too, as the blue clips area was busted while taking it out.

 

[Matsterious]

I thought slowly wiggling might free it from the blue things. nope! I lost one as well into the abyss (they disappear fast!). Fingers crossed it doesn't cause a rattle.

I lost the clip also and ordered these below. They fit perfectly.
https://www.amazon.com/dp/B07FW25CG...abc_54KQ5KP9VC5JK5SYH9XA?_encoding=UTF8&psc=1

 

[NC_LFX4]

It appears so. I had to replace my tray too, as the blue clips area was busted while taking it out.

That was certainly frustrating. Time to order a new tray and try again once it comes in I suppose. @LevittownFordParts.com Can you confirm this is the correct part for the tray? Thank you in advance!

 

[LevittownFordParts.com]

That was certainly frustrating. Time to order a new tray and try again once it comes in I suppose. @LevittownFordParts.com Can you confirm this is the correct part for the tray? Thank you in advance!

Sure, part # is KB3Z-2104338-AA

Thanks,
- Benny

 

[NC_LFX4]

Sure, part # is KB3Z-2104338-AA

Thanks,
- Benny

Perfect, that’s what I already ordered this morning.

 

[taildraggerpilot]

Has anyone installed a USB port(s) in the dash tray? I have a dual-port USB part in mind, and would like to flush mount it in the back wall of the tray, but I’m worried about the clearance behind the tray (B&O center speaker).

This is the UBS jack setup I’m interested in:

https://www.amazon.com/dp/B08DFQKSQG/ref=cm_sw_em_r_mt_dp_3W1ZBVW74CF858Q901VK?_encoding=UTF8&psc=1

I already have the BuiltRight tray rack installed.

 

[RAYJAY]

what model ram mount is every one using ? going to install the Rail like misfit toy did

 

[RAYJAY]

Ram makes a nice T-slot rail so you can attach any of their phone mounts...and leave room up front for cheese burgers...

Misfit what model ram mount are you using on the rail?

Sponsored