- Banned
- #946
I know nothing about Macs and most of what you're talking about.I have Crossover and ForScan installed on they are working fine. I try to run the command 'cd /dev ' and then 'ls>/disconnect.txt' so that I can get the USB information to add it to my regedit. (This is all per Nemesis5zero's YouTube Video). I get an error that says 'read-only' and won't display the txt file for /disconnect.txt or /reconnect.txt. Apparently, there is a System Integrity Protection (SIP) that blocks write access to some files, but I can't disable that either (which I should be able to) during a reboot using 'command+R' to access the terminal.
When I try to use ForScan on my truck, I get an error about not being able to find an adapter. Unless I am missing something else. I think it's because it's not activating the ELM327 (237) adapter. My light on the adapter is red and never turns green.
I have tried running all these commands using sudo, but get the same results.
However, on my adaptor, OBDLinkEX101 a red light means you need to install the required drivers for the adaptor. I was able to do this from the manufacturers website.
I found a little 10" HP running windows 10 refurbished by Amazon for $120. It was on my doorstep in about 4 days. It should be more than capable for Forscan and any future tuning on the Ranger. Just in case the fun turns into a pain.I hear you there. I thought about picking up a $150 or so laptop off of Facebook marketplace or Craigslist just for this but I’d rather try my Mac first. My daughter does have a windows laptop I can borrow but I like to tinker so I am trying the Mac route first. I am a former IT guy, certified in blah blah blah, lol, so I enjoy doing this stuff….now that I am not doing it for people who can’t connect to their printer for the 50th time.![]()
Sponsored