Stefano187
Member
Thank you very much, instead for the terrain menager? Am I obliged to install the button as well, or can I do as the raptor does from the steering wheel?
Sponsored
Sponsored
FX4 Off Road Angles Display
- Thread starter rangerdanger
- Start date
- Watchers 21
Stefano187
Member
But even if the ranger raptor didn't set them from the flying keyboard in theory I should be able to do it too without changing the 4x4 selector right? also because I don't know if in Europe you find that spare
t4thfavor
Well-Known Member
It's a button in the middle of the 4x4 knob. You just have to push it a few times to select the mode.
Stefano187
Member
Yes yes I know it but I in the European version I have the 4x4 selector as in the photo and I do not have the TM, the raptor is the same but it has the TM that drives the steering wheel through buttons of the on-board computer menu, I wanted to know if it is possible to enable it and make it work like I raptor because it is likely that I do not find it as a replacement in Ford I 4x4 selector that you say
Stefano187
Member
You thought something was simple! Now ford if it exists as a spare in Europe that button (the selector you have), thank you for everything for the help, I update you as soon as I have news both on the OffRoad menu and on the TM
Blue Streak
Well-Known Member
- First Name
- Larry
- Joined
- Jul 11, 2019
- Threads
- 38
- Messages
- 1,309
- Reaction score
- 5,022
- Location
- New Location still in Missouri
- Vehicle(s)
- 2019 Ranger XL STX FX 2021 Honda CR V
- Occupation
- Retired
- Vehicle Showcase
- 1
Always remember to watch the screen carefully with both eyes, this way you won't see yourself drive over the edge.
andrejt
New Member
Hello Stefano187,
I have the same problem with my Ford Ranger Wildtrak 2020 (EU Model) - no angles in the off-road menu, only the steering angle and diff lock icon. Did you manager to enable the angles (via computer) or do you have to buy the extra TM 4x4 button?
Thanks for your answer and greetings from Slovenia.
t4thfavor
Well-Known Member
On our trucks, there's only one setting to turn on the whole angles display thing. It might be that your truck either wasn't built with the sensor for the angle, or that sensor is broken.
In forscan it's called something like "Offroad Screen"
andrejt
New Member
Well, on my model there are TWO options :
| Off Road Gauge | Enables Off-road gauges (enable in conjunction with Off-road Screen) | IPC | Gizmokid2005 | |
| Off-road Screen | Enables off-road gauges (enable in conjunction with Off Road Gauge) | IPC | 720-07-02 (x3xx xxxx xxxx) | Gizmokid2005 / WhiteLightning19 (AS-BUILT) |
and I have enabled both of them - I'm not sure if our EU Rangers have this sensors build in or not. Everything on the Off-road screen is working except the angles as shown here :
Cabose-1
Well-Known Member
Hill assist has to ha e a way off measuring angle. I have a 4x2 and it knows when im on an angle. So that is one of the sensors that has to work.
Cabose-1
Well-Known Member
Well 2020, xlt, 4x2. My drive way in my profile pic. It works like a charm. Had to read the owners manual on how it works, and have the option on my gauge cluster display. On or off. Don't know about other 4x2 but it has it. Could of used that when learning to drive standard. Lol
Big Blue
Well-Known Member
You have a US spec Ranger we have the angle sensors. The question was do the Rest Of World Rangers have them and Hill Assist. Tha ROW models seem to be the ones that don't show the angles.
Sponsored
