Just updated to Sync 3.4 on my Ranger 2019

[Ace Holliday]

Just Climate Domain in the APIM Module and not the APIM (As Built)?

Just the “Climate Domain” but NOT in the “As Built” module.

Sponsored

 

[TORQUERULES]

Just the “Climate Domain” but NOT in the “As Built” module.

Thanks!

 

[Ace Holliday]

Just Climate Domain in the APIM Module and not the APIM (As Built)?

On my screen there are two APIM Modules shown. I clicked on the one named “APIM” and enabled the “Climate Domain” and clicked “Write”.
I have never changed an “As Built” module.

 

[Big Blue]

On my screen there are two APIM Modules shown. I clicked on the one named “APIM” and enabled the “Climate Domain” and clicked “Write”.
I have never changed an “As Built” module.

It is always safer to use the configuration menus than changing the As-Built. Changing the As-Built requires you needing to know the correct thing to change. Some modules don't have a configuration menu, but you probably shouldn't be changing them anyway.

As has been mentioned many times, back-up before you change anything and save a copy if your changes worked.

 

[Geoff]

Just climate domain.

Are the other two enabled by default then?

Climate Icons - Mode​

Climate Icons - Recirc​

My climate screen shows Mode and Recirc Buttons (they work) and they are nice but I wasn't sure if these needed to be enabled separately or if they'd be enabled when the Climate Domain was enabled. In any event enabling them seemed the way to go.

 

[Gizmokid2005]

So I dropped the truck off this morning at the dealership. By the time I got home I had a notification from Ford Pass that they did a master reset. I just got a call that they still don't know what's going on (what happened to talking to Ford Engineering?) and have a call into Ford Engineering and should have an answer in the morning. So, it sits for another day and we'll see what happens. I'll keep y'all posted.

 

[Geoff]

So I dropped the truck off this morning at the dealership. By the time I got home I had a notification from Ford Pass that they did a master reset. I just got a call that they still don't know what's going on (what happened to talking to Ford Engineering?) and have a call into Ford Engineering and should have an answer in the morning. So, it sits for another day and we'll see what happens. I'll keep y'all posted.

Well that's a buzzkill.

 

[Gizmokid2005]

Well that's a buzzkill.

I've been less than thrilled with this dealership so far (aside from their ability to get me in nearly immediately) in terms of service. They have some of the cheapest part/accessory prices around I've found, but this is not a great first look at service.

 

[TORQUERULES]

Are the other two enabled by default then?

Climate Icons - Mode​

Climate Icons - Recirc​

My climate screen shows Mode and Recirc Buttons (they work) and they are nice but I wasn't sure if these needed to be enabled separately or if they'd be enabled when the Climate Domain was enabled. In any event enabling them seemed the way to go.

I think I will also do this just in case.

 

[Geoff]

I think I will also do this just in case.

If the Icons are on your screen you shouldn't need to do anything more.

 

[TORQUERULES]

If the Icons are on your screen you shouldn't need to do anything more.

Haven't had a chance to tweak yet. I'll just do the Climate Domain first and see what it looks like. Then report back. Waiting on the UPS guy with my OBD link...

 

[TORQUERULES]

So, I was supposed to get the OBD Link today and it even said delivered and handed to the customer, but I was not even home... Amazon is sending a replacement.

 

[j0shm1lls]

So I tried to install the official update coming from the unofficial 19200 build. Drove home for about 40 minutes and it still wasn't done restarting so I let it sit for almost an hour and it still kept restarting.

This was on 19200

And this is now

Not sure if that's everything or if I need to try this again...

EDIT:
I took a look at the USB drive and it appears 9 different log folders/files have been created, each about 7 minutes apart, below are the contents:

InterrogatorLog() +
CopyInterrogatorLog +
Interrogator log generation unsuccessful
CopyInterrogatorLog -
InterrogatorLog() -
getVINnumber thread already terminated

 

[SafetyDan]

So I dropped the truck off this morning at the dealership. By the time I got home I had a notification from Ford Pass that they did a master reset. I just got a call that they still don't know what's going on (what happened to talking to Ford Engineering?) and have a call into Ford Engineering and should have an answer in the morning. So, it sits for another day and we'll see what happens. I'll keep y'all posted.

Looking forward to hearing what they do.

 

[Benworks]

Not sure if asked before but those that have lost climate after updating I wonder if you were missing the heated seat controls prior to the update? I updated on my lariat to 3.4 and am also missing the climate icons. Seat control was not showing on mine on 3.3. Just looking to see if a common factor.

Sponsored