I_smell_like_diesel
Well-Known Member
- First Name
- Chris
- Joined
- Sep 2, 2019
- Threads
- 15
- Messages
- 257
- Reaction score
- 331
- Location
- Western Maine
- Vehicle(s)
- 2019 Ford Ranger FX4 Lariat
- Occupation
- Self Employed
- Thread starter
- #1
I recently installed a set of Fox 2.0 Coilover and I'm wanting to adjust them up, from the factory setting, to about 2.5"-3". From what I've been see reoccurring on here is anything above 2", you should be considering running an aftermarket UCA. I've been looking at the Fabtech UCA kit on Rogue Offroads website, since it seems a little more affordable and it uses a sealed ball joint (this trucks daily driven in Michigan.... dirt roads, road salt, and so on). I've seen looking at the BDS and Icon UCA's as well. You folks have any recommendations and/or good/bad experiences between the 3 UCA's or others.
https://www.rogue-offroad.com/ProductDetails.asp?ProductCode=FTS22293&CartID=1
Thanks in advance!
https://www.rogue-offroad.com/ProductDetails.asp?ProductCode=FTS22293&CartID=1
Thanks in advance!
Sponsored