emesel
Well-Known Member
- First Name
- Mark
- Joined
- Mar 8, 2022
- Threads
- 12
- Messages
- 92
- Reaction score
- 87
- Location
- New England
- Vehicle(s)
- 2019 Ranger
- Occupation
- Engineer
- Thread starter
- #1
I have 2019 Ranger w factory tow pkg. I tow 4500 pound trailer. Never had problem until Rocky Mountains; had "engine overheated" message pop up 3 - 4 times. I tow with towing feature activated. Only overheated going uphill with trailer, rpm approx 3500. When engine cold, temp indicator is at bottom, then incrementally goes up to normal (middle). When it overheated, indicator jumped to top, then a minute later when it cooled a bit it jumped back to normal.
Dealer replaced thermostat and cylinder head temp sensor.
Questions:
1) Is it normal for temp indicator to jump from normal to max and then jump back when cooled?
2) Do I have a cooling problem, or is 4500 pound trailer in Rocky Mountsins too much? (I'm 2500 pounds under GCWR, 3000 under max tow rating.)
Thanks. Mark
Dealer replaced thermostat and cylinder head temp sensor.
Questions:
1) Is it normal for temp indicator to jump from normal to max and then jump back when cooled?
2) Do I have a cooling problem, or is 4500 pound trailer in Rocky Mountsins too much? (I'm 2500 pounds under GCWR, 3000 under max tow rating.)
Thanks. Mark
Sponsored