Switch Panel for Aux Lighting - What is everyone using?

[emkeiz]

Have you got an image of it in your truck? I'm just interested to see what it looks like in the NA model. I was wondering if the buttons are angled for a right hand drive or are straight out?
THX

That pic in my OP is of the panel in my NA model truck. They are straight out

Sponsored

 

[OFC Ranger]

Stedi AUS. Snaps into place in seconds, completely non-permanent, super easy to wire to

And with one simple change, in my opinion, that switch panel is so much better than LightForce. Adding that angle makes button visibility and toggling much more natural. Got a link?

 

[emkeiz]

And with one simple change, in my opinion, that switch panel is so much better than LightForce. Adding that angle makes button visibility and toggling much more natural. Got a link?

https://www.stedi.com.au/switch-panel-to-suit-ford.html

 

[OFC Ranger]

https://www.stedi.com.au/switch-panel-to-suit-ford.html

Thanks.

$135 USD including four switches of my choice for a natural OEM look is reasonable. I hate you guys sometimes. Always something to spend money on.

 

[emkeiz]

Thanks.

$135 USD including four switches of my choice for a natural OEM look is reasonable. I hate you guys sometimes. Always something to spend money on.

Yeah keep in mind they list AUD prices so you have to do the math to check - not sure if you already did. I bought a light bar and mounts from the same company and it was all under $300 USD. Super good deal for the quality in my opinion. The price for the panel is worth it considering it's so easy to install and remove to put in more switches.

 

[OFC Ranger]

Yeah keep in mind they list AUD prices so you have to do the math to check - not sure if you already did. I bought a light bar and mounts from the same company and it was all under $300 USD. Super good deal for the quality in my opinion. The price for the panel is worth it considering it's so easy to install and remove to put in more switches.

Yea the price is $179 AUD and a quick check on a converter puts it around $135 USD

(USD is about 77 cents to 1.00 AUD)

 

[FoMoCoDave]

Did anybody notice this Trigger Bluetooth Relay.

 

[OFC Ranger]

Did anybody notice this Trigger Bluetooth Relay.

Never wanted to pay prices for their controllers but this for isolated lighting systems...

 

[daniel3507]

@emkeiz how did you route your wires to get there? I'm not too experienced with wiring but this seems like a better looking and cheaper option than trigger but the trigger seems very easy since you don't have to bring wires into the cab

 

[Palibouss]

As I get my 2020 Ford Ranger XLT FX4 ready for Spring exploring and adventuring I am thinking about Auxiliary lighting. There are so many different lighting systems available and I would sure like to hear from everyone on that, too. But; being a BIG detail person, what about the switches? I have a F550 Super Duty and there are aux switches supplied on the dash, but nothing on the dash of the Ranger. I would like to have a clean appearance panel. But what has been already done by you ladies and guys? I see there is Lightforce and Switch Pros lighting panels out there. But what has actually been used. Plus Pictures. Please help!

As I get my 2020 Ford Ranger XLT FX4 ready for Spring exploring and adventuring I am thinking about Auxiliary lighting. There are so many different lighting systems available and I would sure like to hear from everyone on that, too. But; being a BIG detail person, what about the switches? I have a F550 Super Duty and there are aux switches supplied on the dash, but nothing on the dash of the Ranger. I would like to have a clean appearance panel. But what has been already done by you ladies and guys? I see there is Lightforce and Switch Pros lighting panels out there. But what has actually been used. Plus Pictures. Please help!

Hey Bryan, I drove myself crazy trying to figure out what to do also between trigger, light force & switch pros. I wanted the cleanest closest thing to a factory look. So I hooked up with Tyson @offradalliance, I went with switchpros w/ the custom ranger panel package. All came in last week hopefully installing them this week along with my ic & charge pipes.

 

[Palibouss]

will do.

 

[emkeiz]

@emkeiz how did you route your wires to get there? I'm not too experienced with wiring but this seems like a better looking and cheaper option than trigger but the trigger seems very easy since you don't have to bring wires into the cab

Hey there! The wiring is super easy as long as you know the basics. The way i routed it required no additional removal of interior panels. At the back of the switch panel, the wires can be tucked behind the panel beneath the steering wheel. From then, i went through the existing rubber grommet in the firewall and to the battery, lightbar, & keyed fuse. I think the hardest part of the whole install was getting through that rubber grommet, but with an extra set of hands it worked well.

 

[Byngsboys]

Hey:
Would you please run through what is in the package from Offroadalliance?
Thanks,

 

[Palibouss]

Hey:
Would you please run through what is in the package is from Offroadalliance?
Thanks,

Hey it’s the switch pros for ranger kit. Ask for Tyson from offroadalliance. I’m installing mine tomorrow. Will be posting pix when done.

 

[Polaris130]

Pretty minimally invasive installation with no drilling except for the grommet for the wire through the firewall

hey i went with the exact setup as you but Im stuck with the tap a fuse wire and where/what fuse to tap into. I can see in the pic that its running into the fuse box. Do you have constant power to it or only when the ignition is on? thanks!

Sponsored