2020 FX4 Crew Cab - Stock suspension.
13.2L/100 km or for those from the south: 17.82 m/g
65-70% in town. Occasionally pulling a 5000 lb Jayco X23B trailer.
It gets better mileage in town then the Frontier got on the highway.
Good evening:
Welcome to the world of towing. You are going to get a ton of conflicting opinions!
I will be pulling a 24ft 5000lb Jayco with a 2020 Ranger XLT FX4. I've added a brake controller and will be using a WD system. Beyond that I agree with the gentleman above said, add as needed...
We looked at a couple of different ones. Nice rig. The 19MBLE made the short list, but we decided to hold off until we could use it more then 2-3 weeks per year. Retirement is coming! (hopefully...lol)
Kris
Good afternoon all!
Returning to the world of towing after a few years off. We have purchased a 2011 Jayco X23B.
For people who care about these things: RV GVWR=4950, Hitch Wt=450, GCVW=9960. We will have WD system and a friction sway bar.
We don't actually pick it up until May, but I have...
Good evening:
Thanks for the input. The ditch lights would be on their own independent switch. So if the Auxbeam ditch lights were on, then they would be lite fogs during on low beams and whites on high beams. The other options would be a third relay. I have room on my switch gang to...
Good evening all:
I don't know if this has been covered and if it has I apologize and trust you will redirect me.
I currently have factory fog lights on my FX4 XLT 302A. I have added a set of bumper mounted fogs and Auxbeam Amber/White cubes near the A-pillar to act as ditch lights controlled...
Good afternoon all:
Well there it is. I have now installed my Auxbeam 6 Gang to run LED Fogs to match, LED Aux reverse lights and under hood lights. The Wolf Haus and bed lights are installed in the back.
Someone asked about the underwood lights. I used a spare bed light and just ran a wire...
Today’s additions:
Aux rear lights and under the hood lights. Both are controlled by the Auxbeam switches. My biggest problem remains finding an accessible switched power source in the front fuse box.i love to use the accessory fuses but the add a circuit interferes with the fuse lid so...
Good evening:
Here is the Auxbeam install with a dual USB replacement. So far I've only installed the switch panel because I keep changing my mind on the farkles. I know I'm going to install rear lights, but as to the rest still thinking!
Good evening all:
Since we lasts spoke:
Auxbeam 6 Switch Gane blue mounted and yes getting through the firewall grommet was a pain and yes I did have to buy the tool.
Wolf Haus outlet installed. It is well engineered and easy install. It took longer to get the plug plug out then install the...
Good afternoon all:
I've bee looking at mounting a set of ditch lights. I can't seem to get a good answer on the DZ. There seems to be 3 models for a 2020 FX4 XLT. DZ1077, DZ1078 and DZ1079.
Does anyone know which is the correct one? Has anyone mounted a set?
Thanks,
Kris
Good afternoon:
I know this might be crazy...have you tried unplugging the tailgate?
I don't remember the alarms going off when I had the tailgate off the truck for awhile, so I would imagine that it won't know that it was there if it was unplugged?
Take care,
Kris