Rear Tow Hooks

[Sasktechy]

I had a pair of old front tow hooks I took off an F150 when I put a bull bar on it. Got looking at them a while ago and thought maybe they could be adapted as rear tow hooks on the Ranger. Turns out it is a very easy mod and install. I believe these are the same on all F150's from 2009-2019.
I removed the rear most bolt mounting the trailer hitch to the frame. Then I enlarged the slotted hole on the hook just a bit so the bolt would fit through it. If you hold it in place you will see where it interferes slightly and I ground it off on the hook itself, to allow it to sit flat. You will notice that it fits inside the U shape of the hitch perfectly and is held captive. At that point I installed the bolt I had taken out and snugged it. Then I marked the frame rail for the second bolt and drilled it. Installed another bolt and final tightened. Very happy with the way it turned out and a very cheap mod. You can even buy those same hooks online in chrome!

Sponsored

 

[Dereku]

I like it.

 

[Frenchy]

A good idea for those without a hitch and hitch recovery shackle

 

[LB'sTremor]

how close is it to the bumper? can you post a pic back a bit and level with the bumper? I an trying to tell how close they are to factory Tremor location.

Thx!

LB

 

[OneMore]

Hi Gord,

Great idea you have presented.
I just ordered a new set with hardware on eBay. Only $27 and free shipping.

https://www.ebay.com/itm/3229339650...FYtUt5rXH69unA%3D%3D|ampid:PL_CLK|clp:2563228

Wow. That is one long link number.

Thank you for sharing you Idea.

 

[Sasktechy]

Hi Gord,

Great idea you have presented.
I just ordered a new set with hardware on eBay. Only $27 and free shipping.

https://www.ebay.com/itm/322933965066?_trkparms=amclksrc=ITM&aid=1110010&algo=HOMESPLICE.DISCCARDS&ao=1&asc=239178&meid=5f31021b22cd456f8dfa2a8670cd89cf&pid=101112&rk=1&rkt=1&sd=193727661852&itm=322933965066&pmt=1&noa=0&pg=2563228&algv=default&brand=Unbranded&_trksid=p2563228.c101112.m1982&amdata=cksum:3229339650665f31021b22cd456f8dfa2a8670cd89cf|enc:AQAHAAAA8C9MqZj5rvev%2FtpGrc%2FLsyOEnhhdv13eu1ANATi2USv2i%2BBiKAeNikatPub5zzRBvhKQuhbM1P%2BL8lb98vPwP7KI3yVA26tALbsVUnXlh7YOeydNcYT14FzOnnU6XcDQS5BCSH1Bd6wp9bfBFthywH%2BVKg%2B5Cq5EgN5gt0R2RHmJhjzU%2FEvkA6ADB8lNC8VNjKi0fGYUGjK1FNq67iD%2B6q0KSUXyj1DcVSpK9mzhon16oJ4DWklUzL4e8XL6rNNiuaKelgBEPhu8ahnQ61NYgPblM5BSVa0EDYkrNtwbTj0MdAto6qAeFYtUt5rXH69unA%3D%3D|ampidL_CLK|clp:2563228

Wow. That is one long link number.

Thank you for sharing you Idea.

You're welcome!

 

[Sasktechy]

how close is it to the bumper? can you post a pic back a bit and level with the bumper? I an trying to tell how close they are to factory Tremor location.

Thx!

LB

Here are a couple more pics.....
One looking straight down in line with the tailgate and one taken level with it from the rear. The is ample room to get a hook or strap on it. Hope that helps.....

 

[P-38Ranger]

Thank you for the post. Just got my 2022, and was thinking about this.
I looked under my truck to see about doing this, and since I am not 4WD I am going to pass.
Turns the tow fitting outermost bracket, has two nice holes/slots on either side that I can hook a full size Karbinier, and I could tie a strap or rope to that.

 

[LB'sTremor]

Drawtite #76275
Ford Ranger 2019-22 Drawtite Uhaul Receiver hitch #7500
Easy install 20 minutes
NO DRIPPING
does not interfere with Spare tire

2019 -2022 Ford Ranger Pickup

Installation Time: 20 Minutes
Uses all existing holes, No Drilling required.
Fits all models without factory installed receiver.
Under vehicle spare tire stowage is retained.

 

[9zero1790]

I had a pair of old front tow hooks I took off an F150 when I put a bull bar on it. Got looking at them a while ago and thought maybe they could be adapted as rear tow hooks on the Ranger. Turns out it is a very easy mod and install. I believe these are the same on all F150's from 2009-2019.
I removed the rear most bolt mounting the trailer hitch to the frame. Then I enlarged the slotted hole on the hook just a bit so the bolt would fit through it. If you hold it in place you will see where it interferes slightly and I ground it off on the hook itself, to allow it to sit flat. You will notice that it fits inside the U shape of the hitch perfectly and is held captive. At that point I installed the bolt I had taken out and snugged it. Then I marked the frame rail for the second bolt and drilled it. Installed another bolt and final tightened. Very happy with the way it turned out and a very cheap mod. You can even buy those same hooks online in chrome!

and im sold! good work

 

[P. A. Schilke]

Drawtite #76275
Ford Ranger 2019-22 Drawtite Uhaul Receiver hitch #7500
Easy install 20 minutes
NO DRIPPING
does not interfere with Spare tire

2019 -2022 Ford Ranger Pickup

Installation Time: 20 Minutes
Uses all existing holes, No Drilling required.
Fits all models without factory installed receiver.
Under vehicle spare tire stowage is retained.

Ordered today. Delivery via Amazon on our 18th wedding Anniversary! I think Margie will be thrilled to receive such a peasant, eh?

Best,
Phil

 

[LB'sTremor]

wierd I thought I was posting a response to a guy with a Tremor with tow hooks looking for a hitch solution... Glad it worked out Phil!

LB

 

[ppfd]

I stuck one of these on mine:
https://www.gearamerica.com/collect...aramerica-2-5x2-5-uber-pro-hitch-receiver-red

 

[Bsqrd]

I had a pair of old front tow hooks I took off an F150 when I put a bull bar on it. Got looking at them a while ago and thought maybe they could be adapted as rear tow hooks on the Ranger. Turns out it is a very easy mod and install. I believe these are the same on all F150's from 2009-2019.
I removed the rear most bolt mounting the trailer hitch to the frame. Then I enlarged the slotted hole on the hook just a bit so the bolt would fit through it. If you hold it in place you will see where it interferes slightly and I ground it off on the hook itself, to allow it to sit flat. You will notice that it fits inside the U shape of the hitch perfectly and is held captive. At that point I installed the bolt I had taken out and snugged it. Then I marked the frame rail for the second bolt and drilled it. Installed another bolt and final tightened. Very happy with the way it turned out and a very cheap mod. You can even buy those same hooks online in chrome!

I'm curious how long these are? The ones I ordered off of ebay for the years you listed seem to be shorter and they touch the bumper. I think these hooks are from an older model F-150 (2004-2014?).

 

[R_Willis]

I had a pair of old front tow hooks I took off an F150 when I put a bull bar on it. Got looking at them a while ago and thought maybe they could be adapted as rear tow hooks on the Ranger. Turns out it is a very easy mod and install. I believe these are the same on all F150's from 2009-2019.
I removed the rear most bolt mounting the trailer hitch to the frame. Then I enlarged the slotted hole on the hook just a bit so the bolt would fit through it. If you hold it in place you will see where it interferes slightly and I ground it off on the hook itself, to allow it to sit flat. You will notice that it fits inside the U shape of the hitch perfectly and is held captive. At that point I installed the bolt I had taken out and snugged it. Then I marked the frame rail for the second bolt and drilled it. Installed another bolt and final tightened. Very happy with the way it turned out and a very cheap mod. You can even buy those same hooks online in chrome!

Guess you had to tap the second bolt hole you drilled with some threads?

Sponsored