Looking for Splash Gaurds/Mud Flaps That Work With Factory Wheel Lip Moldings

[ShapeShifter]

I found a set of 4 on Amazon for ~$70 but they don't fit over the factory moldings. The ones on Ford's website that supposedly fit my VIN are $100 just for the front ones

Anybody know where to get some aftermarket mud flaps that fit with the factory wheel well molding?

Any help is appreciated!

Sponsored

 

[rang19ca]

Rok Blox and Weather Tech.

 

[Joeiconic]

The “Tecoom” brand on Amazon are supposedly a direct knockoff of the Ford factory flaps. Looks like they’re $64 for all four. Search for that name here and you should be able to find some info.

 

[Muscleford]

I have the ones Rob wrote about. They mount like factorye x ept no Ford logo.

 

[COblue]

I bought something like This and it sits flush with the fenders.

Can get ya pics tomorrow if you'd like

 

[JaysOnTheEDGE]

I got the Ford branded gatorback mudflaps and they worked with the stock sport trim

 

[DukeCanBuildit]

Hey Todd, is the Tremor wheel well trim moulding the issue? They stick out further than they do on non-Tremor models.

 

[ShapeShifter]

The “Tecoom” brand on Amazon are supposedly a direct knockoff of the Ford factory flaps. Looks like they’re $64 for all four. Search for that name here and you should be able to find some info.

I ordered these, which look to be exactly the same as the Teecom ones. I see the flaps in your avatar and I thought I could get them to fit like yours, but I pushed and mushed on them, and the best fit I could get is shown in my pic. It aapears that my molding is straight at the bottom and wont accomodate the bulge in the flap.

 

[ShapeShifter]

Thanks for all the replys.

Another confusing thing is, when I go parts.ford.com and plug in my VIN, the diagrams show two types. I think I need the "flat" type (circled in yewllow). But again, dont really want to pay full boat for these. $95 for just the front pair.

 

[ShapeShifter]

I bought something like This and it sits flush with the fenders.

Can get ya pics tomorrow if you'd like

Those look like they are the ones that will fit! Post a pic, if you can.

 

[ShapeShifter]

Hey Todd, is the Tremor wheel well trim moulding the issue? They stick out further than they do on non-Tremor models.

It's the shape of the molding. You can see the pic in my reply to Rob.

 

[Joeiconic]

Sorry, I didn’t recognize that you have a Tremor, which requires a different fitment.

 

[DukeCanBuildit]

It's the shape of the molding. You can see the pic in my reply to Rob.

Yep, it’s the Tremor wheel well trim that is the issue. It’s a different shape/profile than other Rangers. They are flush to the body panel, whereas on the Tremor, they are like a small fender flare - likely because of the lower wheel offset and wider tire.

 

[Canadian Ranger]

You could have a problem finding ones that fit.
Likely why, when on the Build & Price and you add a package that changes the fender flare, it won't let you buy the splash guards. Or if you buy the splash guards it won't let you buy the package.

 

[06Warrior]

I put these on from Amazon.
Tecoom Mud Flaps Splash Guards... https://www.amazon.com/dp/B0811RXKX6?ref=ppx_pop_mob_ap_share

Sponsored