That's why, many months ago in this same thread, I recommended nothing more than a 12k LED bulb.
I will SECOND that 100%. I've also posted this a few times. Speaking from experience, the Auxito 16k over drive the reflectors something awful in the low beam housing. I immediately switched to the Auxito 12k and the result is MUCH better. I've been running these for over a year and have not been flashed. (as a side note - making sure they are adjusted correctly also helps....especially after a level)
And I've been running my JDM's for almost 2 years without being flashed by other drivers or any mechanical/electrical issue.
Do you happen to have a link to the ones you have in your Ranger? I would like to check those out.
The only 12,000 lumen Auxitos I can find are the ones that you cannot “clock” to the 3 & 9 position. Are those the kind you have?
Yes. These are the one's I've had for a year now. You're correct that they cannot be clocked....and mine were 'off' by a little but I haven't had any issues. Like I said, I initially tried the 16k and even clocked correctly they had a ton of scatter and pretty much no cutoff....I also tried JDM and wasn't happy with the light output (or the pattern). I have been very happy with these.The only 12,000 lumen Auxitos I can find are the ones that you cannot “clock” to the 3 & 9 position. Are those the kind you have?
I hate to ask, but do you happen to have a picture of the pattern against a wall? Just curious to see what they look like at night before I try to convince my wife to let me buy more LEDs ?.
Thank you.
Do you think these are similar to the JDMs you are running?
Pretty darn close. As long as the size is 1:1 from the OEM halogen bulb, you should be able to get the dust cover on completely.
Interesting, think if I am spending that much I would like a projector style but I do like the data they share about the lights in their video. Good to know there is another option out there, thanks for the share.
