Big Blue
Well-Known Member
?I am going to have to try this, I also use the raptor screen in night mode, but the blue is just to much.... blue.
Sponsored
?I am going to have to try this, I also use the raptor screen in night mode, but the blue is just to much.... blue.
Did you use a saved config when you started it up? I've had intermittent issues where it wouldn't read, but when I answered no to the "do you want to use this saved config" it worked fine. It takes a bit longer since it has to go thru all the modules again, but it has worked for me.I have the cheaper toggle switch obd2 adapter. worked fine over the summer. I just decided i wanted to go back in and change some stuff. I updated my forscan to latest version . Now it won't read the DTC. Could it be possible it doesn't support that adapter now? seems weird.
Where are you located..? Thanks for reaching out.I'm an IT guy, would love to help but we are a little far apart.
I messed with this and enabled all of the microphones (2021 Lariat) and man it jacked with incoming calls played over the stereo, it would make them cut in and out - like the noise cancelling was fighting the normal audio. It was so bad to the point I just turned it back to normal.Should be mics around the cabin that listen and inform the ANC system on what signal to produce.
Anyone in North Carolina want to help a Newby install terrain management button and program on my 2020 xlt please. Lunch and brews on me...in the Triad area...
Sorry, I’m in Florida today, and my plane doesn’t stop in NC on the way back to the frozen north. Here’s a free extra bump though.Anyone in North Carolina want to help a Newby install terrain management button and program on my 2020 xlt please. Lunch and brews on me...in the Triad area...
I'm in Wake Forest, and that will be quite a drive. I have installed the TM in my XLT. I'd be willing to assist you if can't find someone closer. I don't free up until late Feb.Anyone in North Carolina want to help a Newby install terrain management button and program on my 2020 xlt please. Lunch and brews on me...in the Triad area...
It gave me an unable to identify vehicle error - I can't remember exactly. It says to enter the PCM part number. I read in a thread here, and a mustang forum I could get it out of the as builts. But that didn't work.what error are you getting?
Currently on 2 month trial license.do you have a license?