TigerWoodsG5
Well-Known Member
- First Name
- Jerry
- Joined
- Apr 24, 2019
- Threads
- 9
- Messages
- 50
- Reaction score
- 82
- Location
- San Antonio
- Vehicle(s)
- 2019 XLT Ford Ranger
- Vehicle Showcase
- 1
- Thread starter
- #1
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Compliance Recall 19S15
Compliance Recall 19S15
Certain 2019 Model Year Ranger Vehicles
Shift Cable Bracket Fasteners
Affected Vehicles:Shift Cable Bracket Fasteners
Vehicle: Ranger
Model Year: 2019
Assembly Plant: Michigan
Build Dates: March 05, 2019 through March 13, 2019
Reasons for this Compliance Recall:
Ford is issuing a safety recall for select 2019 Ranger vehicles. On some affected vehicles, the two fasteners that secure the transmission shift cable bracket to the transmission housing may not have been torqued to specification. Over time, an improperly torqued fastener could allow the transmission shift cable bracket to become loose and the transmission to be in a gear state different from the gearshift position selected by the driver.
This condition could allow the driver to remove the ignition key (if equipped) with no instrument panel warning message or chime indicating that the transmission is not in park. This could allow unintended vehicle movement or roll away if the parking brake is not applied, increasing the risk of a crash or injury.
Ford is not aware of any accidents or injuries related to this condition.
Service Action:
Dealers will properly torque the two fasteners and verify the proper operation of the transmission selector assembly according to established workshop manual procedure. Prior to the recall repair, the parking brake should be applied whenever the vehicle is parked.
Credit to ice-capades
Sponsored
Attachments
-
18 KB Views: 305