Biggest Wheel/Tire combo with no lift?

[Allan_Ardor]

Hello all, I'm curious as to whats the biggest wheel/tire setup people have achieved without doing a lift on these tremors as I know they are already slightly lifted.

Pictures if anyone has any would help as well!

Sponsored

 

[Chas_Kev]

https://www.ranger5g.com/forum/threads/biggest-tires-no-lift.2458/

 

[Utah_Bound]

Whew, be prepared. There are dozens of posts, many with pictures already on the forum. I’m 99% sure it’s 285/70r17 with crash bars moved/removed/replaced with spacers on stock wheels (1/4”+). Or a 255/80r17 with above crash bar modifications.

 

[SilverSlugger]

17 or 18 inch wheel?

Im in the same boat as you, I installed the Fox 2.0 kit to make it level.

From my research, anything below 33 inches will fit with minor crash bar modification. If you don't want to mess with the crash bars then stay at or under 32 inches in total diameter.

I have an 18 inch wheel and I've been looking at the 275 70 R18(33.2inches) or 285 65 R18(32.6 inches)

You will also need to decide what tire rating you want.
B=4 ply
C=6 ply
E=10 ply
F=12 ply

The more "plys" the stronger but also stiffer and heavier so you need to prioritize your needs, one tire will never do everything perfect.

Most with our truck will want E for heavy off-road use and C for a better and stronger tire than stock but still not too heavy. I will be going with a 6 ply to not ruin my MPG's.



Welcome to the wheel+tire black hole.




found this- https://www.ranger5g.com/forum/threads/finally-pulled-the-trigger-on-method-wheels.16583/post-369601

 

[Trigganometry]

I have to laugh! Everyone pretty much on this forum is concerned about gas prices. With that said the bigger the tire the worst you mileage. So in essence, how deep are you digging the hole? ?

 

[Allan_Ardor]

I'm more just what size rim I can fit under there without a lift I'm either going 18" or 20" but want a bit wider stance. Sorry should have clarified lol how wide can we go

 

[KCtremor]

Also curious for a stock height Tremor. I'll be adding 1" wheel spacers too. From FB tremor group, seems like stock tire size is about the biggest we can do without any level, even with crash bars removed?

 

[Utah_Bound]

Also curious for a stock height Tremor. I'll be adding 1" wheel spacers too. From FB tremor group, seems like stock tire size is about the biggest we can do without any level, even with crash bars removed?

There are several trucks, on this forum no less, that are running 275, even 285’s with wheel spacers-with no lift, with crash bars pushed. Search function is your friend!!

 

[KCtremor]

There are several trucks, on this forum no less, that are running 275, even 285’s with wheel spacers-with no lift, with crash bars pushed. Search function is your friend!!

Yeah, anything I have found is either still on stock tires or already has a level/lift done. Or not a Tremor lol. Members might say somethings fits but I haven't seen them post pix ha.

 

[SSingh1975]

I'm planning to run skinny 33s (I ran it on my traded GMC Canyon with 2.5" body lift). I do have 1" level kit installed in the front though

 

[Allan_Ardor]

I just wanna know how much I can push out wider before I run into rubbing issues without a lift. Crash bar removal or replacement isn’t something I’m afraid of more just fender bumper rubbing issues

 

[D Fresh]

Christ dude.


There is literally a 4 year old thread with the same title.


Can we get a merge up in here Dave?

Ok: this is the Tremor forum, I'll give you a pass.

Please don't bro your Ranger though.

 

[D Fresh]

I'm planning to run skinny 33s (I ran it on my traded GMC Canyon with 2.5" body lift). I do have 1" level kit installed in the front though

Might have to raise her up a bit.

With 2" of lift my 33's are close. 255/80 r17.

Disregard, with 1" over stock Tremor suspension you should be good.

 

[JohnnyO]

I just wanna know how much I can push out wider before I run into rubbing issues without a lift. Crash bar removal or replacement isn’t something I’m afraid of more just fender bumper rubbing issues

265/70-17 was a factory optional size in 2019-2020. 32", fits with no issues.

 

[Allan_Ardor]

Tire width isn’t really what I’m looking for, that part I know already. I’m more looking at offset

Sponsored