Adding Adaptive Cruise Control?

[micl9]

Hey the recent discussion on Lane Alert made me realize mine no longer works! If I had to guess its a result of adding ACC.

Do any of you see the same?

Sponsored

 

[Stuboy-2001]

Hey the recent discussion on Lane Alert made me realize mine no longer works! If I had to guess its a result of adding ACC.

Do any of you see the same?

Hi there, if you're talking about the 'lane keeping' option under the 'driver assist' settings, then mine still works after fitting ACC. Mine turns on and off by pushing the button on the end of the indicator stalk

 

[micl9]

Hi there, if you're talking about the 'lane keeping' option under the 'driver assist' settings, then mine still works after fitting ACC. Mine turns on and off by pushing the button on the end of the indicator stalk

I forgot about that. But would expect it to show up in the menu if I accidentally hit that.
Will try later

Thanks for the reply

 

[Big Blue]

I forgot about that. But would expect it to show up in the menu if I accidentally hit that.
Will try later

Thanks for the reply

Toggling the switch will turn the lane indicators on and off on the dash display.

 

[micl9]

LOL that was it. I guess lane keeping has not made much of an impression if I have not noticed it was off until it came up in this thread.
Thanks Guys

 

[5G Dan-O]

LOL that was it. I guess lane keeping has not made much of an impression if I have not noticed it was off until it came up in this thread.
Thanks Guys

It is pretty lame. You pinball back and forth between the lines.

 

[Doc_Rapter_CH]

Hey guys, i have the following trouble on my 2022 Ranger Raptor: the canbus wires are ending at the male C903 Connector. They are‘nt going up to the camera.
Any suggestions?

 

[airline tech]

Ref This thread for Connectors (at the mirror)

Non-auto Dimming Rear View Mirror Power | 2019+ Ford Ranger and Raptor Forum (5th Generation) - Ranger5G.com

NOTE: The ROW Rangers are wired differently (as it appears yours is) from the US Version
This is from the US Version.

The IMPA = C9224

Ref above thread for the connector location, that connector feeds over to the IPMA
You will have to decipher the wire pinout and color vs this diagram, determine which 2 wires are not routed over to the IPMA, then determine where they go into the C9224 connector.

So, if the wires are run to C919 then all you need is to get some terminal ends and tap into connector C919 and route to C9224, but if you note the US Version and the ROW version are pinned differently

This is where you will need a wire diagram and pinout for the ROW Ranger, but this one will give you a basic wire run.

 

[5G Dan-O]

Hey guys, i have the following trouble on my 2022 Ranger Raptor: the canbus wires are ending at the male C903 Connector. They are‘nt going up to the camera.
Any suggestions?

Sorry for the delayed reply to add to the discussion:
For me, I went to a local junkyard/recycler and grabbed the short harness between the IPMA and the connector. My Ranger didn't have the wires either but once I installed the new little harness under the IPMA cover, all was good.

 

[RangerM231]

I have joined the XLT adaptive cruise club thanks to you fine folks. I do really appreciate all the work you guys put into figuring things out.

 

[5G Dan-O]

I have joined the XLT adaptive cruise club thanks to you fine folks. I do really appreciate all the work you guys put into figuring things out.

Excellent! Welcome to the club

 

[tgood7786]

Thank you all for your hard work. I was able to add adaptive cruise control to my 21 XLT!

 

[5G Dan-O]

Welcome to the club!

 

[micl9]

Thank you all for your hard work. I was able to add adaptive cruise control to my 21 XLT!

Good to see people continue to do this one!
By far the most used mod I have done.

 

[21Blackout]

Anyone that has successfully completed this in NY or western PA I would love to talk to you. I really would like to add acc to mine but not that willing to tackle this myself.

Sponsored