Exhaust tip for 2021 Tremor

[OHTREMOR]

What is the correct size to order an exhaust tip for my 21 Tremor?

Sponsored

 

[SEkevin]

I believe it’s 3 inches

 

[Dr3wDrop]

Interested in this thread as well!

 

[Trigganometry]

I believe it’s 3 inches

Do a search on here for this. Tons of posts of what we all used. This is a popular one https://www.amazon.com/gp/aw/d/B00HQZA7C8?psc=1&ref=ppx_pop_mob_b_asin_title

 

[bk23103]

This is an easy fix for the steel fence post that is the stock exhaust pipe for my nearly $50K truck. I've had the truck for a day and a half and I can already tell this forum is going to give me all sorts of ideas on how to spend more money!

 

[Bsqrd]

I bought this one, liked the clamp and seems to be holding up so far.

Amazon.com: 3 Inlet Black Exhaust Tip,MONOKING Universal Clamp On Exhaust Tips for Truck Car Tailpipes 3" Inlet 4" Outlet 12" Long : Automotive

 

[McLeadslinger]

This will compliment a tailgate damper.

 

[Dr3wDrop]

I bought this one, liked the clamp and seems to be holding up so far.

Amazon.com: 3 Inlet Black Exhaust Tip,MONOKING Universal Clamp On Exhaust Tips for Truck Car Tailpipes 3" Inlet 4" Outlet 12" Long : Automotive

Pictures? I am looking to see if people trim the oem exhaust or just slip this on and have it double sleeved so to speak.

 

[Bsqrd]

Pictures? I am looking to see if people trim the oem exhaust or just slip this on and have it double sleeved so to speak.

Didn't trim it. Wanted to see how it looks before I start hacking up the exhaust.

 

[SEkevin]

I bought this one, liked the clamp and seems to be holding up so far.

Amazon.com: 3 Inlet Black Exhaust Tip,MONOKING Universal Clamp On Exhaust Tips for Truck Car Tailpipes 3" Inlet 4" Outlet 12" Long : Automotive

Gotta post a pic for us! ?

 

[OregonRangerTremor]

I got this one. It slips on about as tight as you would expect. The issue is that you get the bolt as tight as you can...and you can still pull it off. Like many I have got in the past; I will go to an exhaust shop, cut off 2-3" of pipe and have them weld this on. It does look good on the Tremor with all the black trim on the truck.
Amazon.com: AUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3" Inlet 4.5" Outlet 9" Overall Length Stainless Steel Exhaust Tips Powder Coated Finish Tailpipe : Automotive

 

[OregonRangerTremor]

Pictures? I am looking to see if people trim the oem exhaust or just slip this on and have it double sleeved so to speak.

Could do it either way. I will probably trim 2-3" off the tail pipe...it will still leave some double sleeving inside.

 

[Bob902]

This is an easy fix for the steel fence post that is the stock exhaust pipe for my nearly $50K truck. I've had the truck for a day and a half and I can already tell this forum is going to give me all sorts of ideas on how to spend more money!

That's why we are here!

 

[Danager]

I used the Go Rhino GRT3414B. Initially I just slid it on. A couple days later, I cut off 3-4 inches of the factory pipe. This allowed the new one to tuck in so it did not stick out at all. Probably not as proud as the factory piece.

 

[JohnnyO]

I got this one:

https://www.amazon.com/gp/product/B08MT5SLLB/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

Also since I'm a details guy I cut 7" off the stock tailpipe with a Sawzall (took 8 seconds) so you don't see it inside the tip and painted the tailpipe from the axle to the tip with black hi-temp paint.

Sponsored