Wheel spacers.

[Ranger Off Roading]

Trying to decide what brand of wheel spacers to get for my 2023 Tremor. Right now im thinking of Bora wheel spacers . 1 inch. Coyote or Dynofit. Not sure about those, one made in China the other UK. Right now looks like Bora since it's USA made. Any thoughts?

Sponsored

 

[mtsoxfan]

I had Bora, 1 1/4" I believe. Main reason, good ol US of A. I trust when an American company states the specs on the metal they use.

 

[TheExtra404]

I had Bora, 1 1/4" I believe. Main reason, good ol US of A. I trust when an American company states the specs on the metal they use.

I have been running the BORA 1.5inch spacers for 2 years now, no issues. I made sure i torqued to the right spec, then double checked 100 miles after.

 

[rang19ca]

I ran Bora 1 in spacers for 4 years and no issues. Torqued the lug nuts and wheel studs.

 

[Ranger Off Roading]

I had Bora, 1 1/4" I believe. Main reason, good ol US of A. I trust when an American company states the specs on the metal they use.

Thanks for the reply. They seem to be well made from what I read.

 

[Ranger Off Roading]

I have been running the BORA 1.5inch spacers for 2 years now, no issues. I made sure i torqued to the right spec, then double checked 100 miles after.

Good to know, they seem well made.

I have been running the BORA 1.5inch spacers for 2 years now, no issues. I made sure i torqued to the right spec, then double checked 100 miles after.

Good to know.

 

[Joe_seph]

I’ve been using 1” spacers from Evil Energy, purchased via Amazon (Canada) this summer. No problems to report.

 

[Ranger Off Roading]

I’ve been using 1” spacers from Evil Energy, purchased via Amazon (Canada) this summer. No problems to report.

Cool! Thanks.

 

[Ranger Off Roading]

f I install 1 inch spacers on my 2023 Tremor with a 2 level lift and going with 275/70/17. How much further would it push the wheel out. Would like to have it even with the fender flare, or outside edge. Don't think I would have any rubbing issues. If I went with a 1.25 spacer which I wouldn't mind doing as well but might have rubbing issues then. Any suggestions?

 

[TheExtra404]

I run my 1.5inch spacers on my tremor without a lift kit, its stock height. I did have to swap the crash bars because they rubbed a little at full lock.

 

[Ranger Off Roading]

I run my 1.5inch spacers on my tremor without a lift kit, its stock height. I did have to swap the crash bars because they rubbed a little at full lock.

What size tires are you running on the Tremor? I don't think I would have to remove my crash bars if I went with the 275.

 

[TheExtra404]

What size tires are you running on the Tremor? I don't think I would have to remove my crash bars if I went with the 275.

I am running stock size, 265/70/17 Firestone Destination AT2

Sponsored