What did you do to your Ranger today?

[LB'sTremor]

I'd be in an f150 if it wasn't a mortgage payment for the powerboost...

It's only $68K!!??? I got on it and was really impressed how the 5.0 sounded only to get home and spot the ecoboost on the tailgate... Tha V8 sound from the radio is hilarious makes me chuckle just thinking about it

LB

Sponsored

 

[Jhbryaniv]

It's only $68K!!??? I got on it and was really impressed how the 5.0 sounded only to get home and spot the ecoboost on the tailgate... Tha V8 sound from the radio is hilarious makes me chuckle just thinking about it

LB

LOL

When I was truck shopping I started at the full-size trucks and the gf started to give me the look when I was talking about spending >70k ok a truck.... So when I told her my ranger was only 45 she was over the moon... LOL

Also, my nickname on another forum is LB.... Strange.

 

[Chris M]

took ol silver in to get the windshield recall done, they gave me a spankin new 150 Lariet FX4 as a loaner (200 Miles on it). Ohh how roomy! if that would fit in the garage the wife would lose this one!

That's the primary reason I bought the Ranger...the F-150 wouldn't fit in the garage.
Glad now that it worked out that way.
By the way, I think your truck is prettier.

 

[Glocker]

Ewwwww

Part out?

I had seen one of these done on a 2019 Ranger during the short time I worked at a Ford dealership after moving to Florida. It's a complete dash out operation and HUGE in book time!

 

[AzScorpion]

I had seen one of these done on a 2019 Ranger during the short time I worked at a Ford dealership after moving to Florida. It's a complete dash out operation and HUGE in book time!

I remember the picture you posted of it. That right there scared me enough into thinking they would never get mine back together without rattling. lol I know some have had theirs done with good results but many others said theirs squeaks/rattles now. That would drive me more crazy than having to spend 15 minutes twice a year manually changing mine over.

 

[Wings06j]

Finally got my window decal put on. Also got heated drivers seat installed. Aftermarket heater $300 with professional install. I chickened out of doing it myself.

 

[subquark]

This has to be the easiest mod yet, even easier than putting in the Husky liners (which I placed over a wrench that took me 30 minutes to locate!). =D

The Start-X was so easy, just a little awkward to first plug in, but super easy. The "programming" went just like the couple of steps illustrated and it works! Maybe took five minutes from start to finish, including getting the flashlight out of the glove box.

I have Ford Pass but typically have my location turned off (not that I'm paranoid, my colander helmet shields me anyway), and then it takes close to a minute for the app to actually load up and then another lag before the truck actually starts. And, not too often, but it'll go to deep sleep and can't be started (that sucks). Plus I want to start the truck as I'm walking to it from the store and now be fumbling with a phone (damn Al Gore internet, that'll blow over soon enough, it's just a fad). =p

Start-X is like magic and it starts withing 10 seconds. This is one of the best mods, for me, so far.

Just follow the directions and the easy to understand LED lights guide you easily to success (don't mind the filthy floor mat, this is a pickup truck). =p

Final step - stick the instructions in the overpriced, and previously deleted, owner's manual bag.

Start-X is Old Man Approved and endorsed for Dump Runs!

Works on 2022s: https://www.amazon.com/dp/B07F422Y98

 

[Jhbryaniv]

This has to be the easiest mod yet, even easier than putting in the Husky liners (which I placed over a wrench that took me 30 minutes to locate!). =D

The Start-X was so easy, just a little awkward to first plug in, but super easy. The "programming" went just like the couple of steps illustrated and it works! Maybe took five minutes from start to finish, including getting the flashlight out of the glove box.

I have Ford Pass but typically have my location turned off (not that I'm paranoid, my colander helmet shields me anyway), and then it takes close to a minute for the app to actually load up and then another lag before the truck actually starts. And, not too often, but it'll go to deep sleep and can't be started (that sucks). Plus I want to start the truck as I'm walking to it from the store and now be fumbling with a phone (damn Al Gore internet, that'll blow over soon enough, it's just a fad). =p

Start-X is like magic and it starts withing 10 seconds. This is one of the best mods, for me, so far.

Just follow the directions and the easy to understand LED lights guide you easily to success (don't mind the filthy floor mat, this is a pickup truck). =p

Final step - stick the instructions in the overpriced, and previously deleted, owner's manual bag.

Start-X is Old Man Approved and endorsed for Dump Runs!

Works on 2022s: https://www.amazon.com/dp/B07F422Y98

Paper manuals, what are you 97 y/o?

 

[Fordup]

I had to put air in the tires. Dropped almost 45 degrees the last week and they are shrinking from the cold. My last vehicles had nitrogen and were stable. That dash pressure readout is right on with my gauge.

 

[IdahoRanger]

I had to put air in the tires. Dropped almost 45 degrees the last week and they are shrinking from the cold. My last vehicles had nitrogen and were stable. That dash pressure readout is right on with my gauge.

Yeah, I need to do the same.

 

[KennethOwenReid]

just purchased a pillar lights and brackets (putco brackets and amazon lights) still researching better leds. picked up a new tough stuff alpha 2 roof top tent so replace my worn out nomad soft top. just installed smoked led mirror signal lights. next ill be looking into an extrusion overland xtr1 bed rack, hopefully by the spring.

 

[NeilP]

I watched a video today and discovered there is a right and a wrong way to connect a trickle charger to vehicles with the BMS. Went out & opened the hood to check if I did it right. Somehow I did.

Interesting video from FordTechMakuloco's youtube channel

 

[Bsthroop]

Mounted my tool box using the rivet nuts in the bed. Next phase will be to install the fuel cell in the box.

 

[subquark]

Paper manuals, what are you 97 y/o?

I gotta put something in my overpriced owner's manual baggie thing! =p

I'm not 97 but my body feels that way some times!

You know, it's funny to be the same age as old folks ....

 

[LB'sTremor]

I had to put air in the tires. Dropped almost 45 degrees the last week and they are shrinking from the cold. My last vehicles had nitrogen and were stable. That dash pressure readout is right on with my gauge.

yeah, a lot of things shrink in the cold...

LB

Sponsored