What did you do to your Ranger today?

[9zero1790]

Has anyone here replaced their Tremor rails with Go Rhino RB10s or RB20s? If so, can you please confirm that they don't stick out so far that they also tear up your legs if you step out without using the step?

most of the ones i have seen stick out a bit, mainly to act as a step for short folks. i got used to them on a previous truck but it was an adjustment. had some leg damage from them first few months.

Sponsored

 

[NTXTremor]

I went with the RB20s because I like the look. It took a wile to get the exit method down so the skin on my legs stays put. They do stick out some and are pretty rough finish. Mine have the linex coating.

The RB20s are listed as 7" wide versus 6" for the RB10s.

It still looks like the RB20s don't stick out quite as far as the steps of the Tremor rails, but some of the issue could be with the geometry of how you step out.

I am going to go with the RB10s in the powder coated finish which should not catch as much as the bed liner finish if they do rub.

Thanks for posting your images.

 

[NTXTremor]

Hey Mark, you gotta stop wearing these…

…for a lot more reasons than just saving the back of your legs. ??

Man, I live in Texas. I have only had to put on long pants 3 times since the pandemic started. ?

 

[9zero1790]

Man, I live in Texas. I have only had to put on long pants 3 times since the pandemic started. ?

for a while when things were work from home i think i went about 9 days without wearing real pants. i got tired of it though. if you want those factory rails out of the way let us know lol. i bet someone around here would be happy to get them out of the way.

 

[AzScorpion]

Hey Mark, you gotta stop wearing these…

…for a lot more reasons than just saving the back of your legs. ??

Hey! I have several pair just like that.

 

[9zero1790]

i think people under 50 passed some sort denim shorts code where they are not allowed unless your a hot female and they are just way too short. you know the kind where the pockets hang lower than the denim...

 

[DukeCanBuildit]

Hey! I have several pair just like that.

That’s it - I‘m staging an intervention. ?

 

[AzScorpion]

That’s it - I‘m staging an intervention. ?

?

 

[TVRangerSTX]

The RB20s are listed as 7" wide versus 6" for the RB10s.

It still looks like the RB20s don't stick out quite as far as the steps of the Tremor rails, but some of the issue could be with the geometry of how you step out.

I am going to go with the RB10s in the powder coated finish which should not catch as much as the bed liner finish if they do rub.

Thanks for posting your images.

The surprise benefit of the RB10's I found was they are pretty good door bumpers, stick out JUST enough to keep from (most) parking lot dings...or you can park like @ScottD

 

[OFC Ranger]

Got a chance to get the front bumper lights wired up. I've come to love these cheap little trailer junction boxes on Amazon. 7 solid connections and multiple ways to bring the wiring in. I currently have 8 in use on my truck as quick disconnect points.

Now I am just waiting for the sun to go down so I can go find somewhere to adjust and aim all these lights.

 

[samsd]

No pics but took the Ranger in for a service, 37500 miles, the left front tire was showing more wear on the inside so had them check and fix the alignment. Threw a drive train malfunction code twice early in February but they could not find anything wrong. Also had them update Sync and that took 90 minutes. Strange thing, after the update the auto stop started working at almost every stop, before the update it hardly worked at all. I know I am in the minority but I like the auto stop feature. Not sure I like the Sync update, seems slow in response to inputs and I do not like the new look.

 

[9zero1790]

sweet trac

No pics but took the Ranger in for a service, 37500 miles, the left front tire was showing more wear on the inside so had them check and fix the alignment. Threw a drive train malfunction code twice early in February but they could not find anything wrong. Also had them update Sync and that took 90 minutes. Strange thing, after the update the auto stop started working at almost every stop, before the update it hardly worked at all. I know I am in the minority but I like the auto stop feature. Not sure I like the Sync update, seems slow in response to inputs and I do not like the new look.

sweet tractor !

 

[melficeapoll]

I removed my bull bar and installed some tow hooks and a skid plate. I did some off hand measuring with the cutouts on the valence, so the openings are a bit too wide, but eh, it serves it purpose.

 

[pull string get cookies]

I removed my bull bar and installed some tow hooks and a skid plate. I did some off hand measuring with the cutouts on the valence, so the openings are a bit too wide, but eh, it serves it purpose.

Never would’ve noticed the cutouts; was too busy admiring how nicely the “ST” grill and headlights come together.

 

[melficeapoll]

Never would’ve noticed the cutouts; was too busy admiring how nicely the “ST” grill and headlights come together.

Ahh, you caught that lol.

Sponsored