egilbe
Well-Known Member
you can pu tit in reverse going 60 MPH and it lights up the backup camera. Just don't put it into park.
Sponsored
Because it’s 2021 and if the car is in motion, it shouldn’t allow the shifter to move into reverse or park while moving. A manual transmission has a reverse lockout for this exact reason.How in the hell would you park your truck at home when your done driving with regard to what you just wrote?
Is this your first Ford ? I ask as the A10 in the Mustang is the same. IMHO, the sport mode is truly useless. All it does is reduce ones fuel economy.Once again, this was not an issue of force,after reading the very first replies here it was evident the problem was that I was pulling the trigger which removed the lockout. I wasn’t jamming the thing into gear. It take surprisingly little force to upshift this thing. Other autos I’ve driven that have a sport mode will typically have a shift to the right or left to engage that rather than up or down. Just glad it didn’t go worse. Now it’s just the unknown of what unseen damage happened. Hopefully none but who knows.
Ha,Is this your first Ford ? I ask as the A10 in the Mustang is the same. IMHO, the sport mode is truly useless. All it does is reduce ones fuel economy.
I’ve owned dozens of fords. I also currently own a Shelby GT350. All have been manual so I’m not familiar with the A10. I can say though that the sport mode does have a significant impact on the driving feel of the Ranger. Shift points and throttle are much more responsive and yes, any time the fun factor or power are increased, I would expect an equal and opposite reduction in fuel economy. I’m not an inexperienced driver or some jackpop that was trying to drive a mid sized pickup like I was auditioning for the next Fast and Furious movie, I was breaking in my new truck by varying rpm, using the driving modes provided in a very reasonable way, and clearly made an error in how the shifter itself functions. As I read the replies here, I quickly learned the source of the error, which was pulling the trigger on the shifter for both upward and downward shifts, causing a scary scenario. I came here assuming there were experienced owners who might shed light on what happened, which some did. Always have to sift through the replies that assume anyone who doesn’t know something they do is a moron. That’s just how the internet works I suppose.Is this your first Ford ? I ask as the A10 in the Mustang is the same. IMHO, the sport mode is truly useless. All it does is reduce ones fuel economy.
There's another thread here where folks say you can be driving down the road and shift into Reverse to use the backup Camera to look behind you... and in doing so it will not damage the transmission...It shouldn’t allow the shifter to move past neutral, right?
Mine is an HEP and it’s truly a special car! Love the Mach 1 though as well!!I truly miss my HEP GT350. I'd still have it if it weren't for my medical issues. Sure wish it had the A10 in my Mach1.
Good advice !Here's another tidbit on the A10. If I were you wanting the varying of the rpm for break in, I wouldn't even consider sport mode for the first 1K.
Use the +- on the side of the shifter and stay in D. You can lock out any gear you want and monitor the tach.
I too was surprised at Ford with having to trigger into N from D but now I completely understand due to the S mode to D concept.
Other than that, this was a very confusing thread.
jeezus…I’ve owned dozens of fords. I also currently own a Shelby GT350. All have been manual so I’m not familiar with the A10. I can say though that the sport mode does have a significant impact on the driving feel of the Ranger. Shift points and throttle are much more responsive and yes, any time the fun factor or power are increased, I would expect an equal and opposite reduction in fuel economy. I’m not an inexperienced driver or some jackpop that was trying to drive a mid sized pickup like I was auditioning for the next Fast and Furious movie, I was breaking in my new truck by varying rpm, using the driving modes provided in a very reasonable way, and clearly made an error in how the shifter itself functions. As I read the replies here, I quickly learned the source of the error, which was pulling the trigger on the shifter for both upward and downward shifts, causing a scary scenario. I came here assuming there were experienced owners who might shed light on what happened, which some did. Always have to sift through the replies that assume anyone who doesn’t know something they do is a moron. That’s just how the internet works I suppose.
Mine is an HEP and it’s truly a special car! Love the Mach 1 though as well!!