Stock Trip Before I Buy Upgrades

[Frenchy]

Right I may get a winch so I can do some more intense stuff and have that safety blanket

The standard kit can do either a winch or bumper up front separately. If you do both you will want the heavy springs up front.

Sponsored

 

[Steve23]

The standard kit can do either a winch or bumper up front separately. If you do both you will want the heavy springs up front.

Yeah so I have to figure that out too lol

 

[BladeRanger]

The size I mentioned earlier is a 33.2 inch tire and should fit with the Old Man EMU lift. Hopefully that will help out. Also no UCA is required for install and alignment!!!

I know this thread is a bit older but looking at the old man EMU technical data, see attached. It say 2 inch lift kit but the lift height says 0 - 3.5 inch, can this kit actually will get you to 3.5 inch height?

 

[t4thfavor]

I know this thread is a bit older but looking at the old man EMU technical data, see attached. It say 2 inch lift kit but the lift height says 0 - 3.5 inch, can this kit actually will get you to 3.5 inch height?

From what I understand the coils are 0-3.5” but the leafs are static 2” at full lift on the coils you would probably be level instead of raked. You’ll also need some upper control arms if you expect to be in alignment and not wreck tires weekly.

 

[Frenchy]

I know this thread is a bit older but looking at the old man EMU technical data, see attached. It say 2 inch lift kit but the lift height says 0 - 3.5 inch, can this kit actually will get you to 3.5 inch height?

Where you got this information I can tell you is incorrect sir. The front is lifted by 2.4 and the rear by 1.6.

 

[D Fresh]

From what I understand the coils are 0-3.5” but the leafs are static 2” at full lift on the coils you would probably be level instead of raked. You’ll also need some upper control arms if you expect to be in alignment and not wreck tires weekly.

Pretty sure the OME kit is not adjustable and that this...

Where you got this information I can tell you is incorrect sir. The front is lifted by 2.4 and the rear by 1.6.

is correct.

 

[t4thfavor]

So the ad is incorrect? I know they do offer a set of adjustable coil overs that go 0-3.5. I have the fox kit and it’s 0-3” but factory it’s set at 2”.

 

[Frenchy]

So the ad is incorrect? I know they do offer a set of adjustable coil overs that go 0-3.5. I have the fox kit and it’s 0-3” but factory it’s set at 2”.

The adjustment for the OME BP-51 is primarily compression and rebound. The preload adjustment is only for load carrying according to ARB

 

[BladeRanger]

Where you got this information I can tell you is incorrect sir. The front is lifted by 2.4 and the rear by 1.6.

I got it from their website, I was just wondering if this a marketing gimmic to confuse people.

 

[Frenchy]

I got it from their website, I was just wondering if this a marketing gimmic to confuse people.

From what website? I can guarantee you it did not come from ARB's website

 

[DukeCanBuildit]

I got it from their website, I was just wondering if this a marketing gimmic to confuse people.

So Bladimir, you’ve really kind of struck the mother load of all things Old Man Emu by running into @Frenchy - if anyone can help you figure it out, it’s their number one fan, Chris. ? Nope, he doesn’t work for them, but man, he sure knows the product well enough to get you headed in the right direction.

 

[Frenchy]

So Bladimir, you’ve really kind of struck the mother load of all things Old Man Emu by running into @Frenchy - if anyone can help you figure it out, it’s their number one fan, Chris. ? Nope, he doesn’t work for them, but man, he sure knows the product well enough to get you headed in the right direction.

At least someone understands LOL

 

[Steve23]

Y’all blowing up my thread lol

Baby ain’t stock no more!

 

[BladeRanger]

From what website? I can guarantee you it did not come from ARB's website

https://www.4wheelparts.com/p/arb-o...ift-kit-heavy-load-rngr19hk/_/R-BHWQ-RNGR19HK

From 4WPARTS, I thought would go to their site to look for solution for a lift. I got the Fox 2.0 coilovers but with my tires and wheel setup , I will need to go to 3.5 inch. So I was looking into old man emu of they had any that can make it to 3.5 inch of lift.

 

[Frenchy]

https://www.4wheelparts.com/p/arb-o...ift-kit-heavy-load-rngr19hk/_/R-BHWQ-RNGR19HK

From 4WPARTS, I thought would go to their site to look for solution for a lift. I got the Fox 2.0 coilovers but with my tires and wheel setup , I will need to go to 3.5 inch. So I was looking into old man emu of they had any that can make it to 3.5 inch of lift.

So from the looks of it 4Wheel Parts has it losted incorrectly on thoer website. Case solved

Sponsored