Cargo tie down - what did you do?

[ttrucks]

I used us cargo L-track on my f350 and works great I used 1/8 x 2 steel strap behind it 1/4 20 nuts and bolts. so it didn't pull throw was a P.I.A, did by myself .... or use aluminum strap . just cut to fit any where it will lay flat to surface of bed ..will look to post pics.

Sponsored

 

[FiestaRanger]

There is a rail system in the works but we have yet to receive one. I am getting an ETA on this and will let you guys know
https://www.levittownfordparts.com/sku/lb3z-2655200-a.html

Thanks,
- Benny

I have been looking for such a rail kit for my Ranger as well. My question is will this part (LB3Z-2655200-A) be compatible with a SuperCrew equipped with the sports bar (part #: VKB3Z99518K00B).

If not, is it possible to have the Maverick's "cargo management system kit" installed on the Ranger?
https://accessories.ford.com/products/cargo-management-system-kit-includes-cleat-tie-down-kit

I know that link says it only fits the Maverick but thought I ask anyway.

Thanks

 

[FoD]

Installed BuiltRights

 

[LevittownFordParts.com]

I have been looking for such a rail kit for my Ranger as well. My question is will this part (LB3Z-2655200-A) be compatible with a SuperCrew equipped with the sports bar (part #: VKB3Z99518K00B).

If not, is it possible to have the Maverick's "cargo management system kit" installed on the Ranger?
https://accessories.ford.com/products/cargo-management-system-kit-includes-cleat-tie-down-kit

I know that link says it only fits the Maverick but thought I ask anyway.

Thanks

Hi,
I do not believe there would be any interference between cargo rails and the sport bar. I have no information confirming if the Maverick rails will fit a Ranger but I believe there were others on the forums attempting to try it. It may be worth starting a thread to discuss this as the Ranger ones have not been made available yet.

- Benny

 

[chaps]

2019 SuperCab (6 ft bed). About 20" behind tailgate is this indent with bolt holes. Are these M8? Would they be sturdy enough for an anchor?

 

[Radioman]

2019 SuperCab (6 ft bed). About 20" behind tailgate is this indent with bolt holes. Are these M8? Would they be sturdy enough for an anchor?

8 mm - 1.25 - Bolt size for the tie-downs in the bed. You will need a tap to clear the threads.

 

[TXRangerTim]

2019 SuperCab (6 ft bed). About 20" behind tailgate is this indent with bolt holes. Are these M8? Would they be sturdy enough for an anchor?

The sides of the bed are M8. The frame sides of the bed next to the tailgate are M6 like circled in red in the picture. (not my truck, borrowed from here).

 

[RangerDanger617]

Hi Steve,

The cargo rails can be ordered here for now https://parts.levittownfordparts.com/oem-parts/ford-rail-assembly-pick-up-box-lb3z2655200a

I will send you a code you can use.

Thanks,
- Benny

I know it is about 3 years later, but the part is discontinued, and I cannot seem to find any remaining stock. I did find Genuine Ford Bed Track And Cleat Cargo Management System For 5.5 Bed - LL3Z-2655200-A | Levittown Ford which claims to be for the F150. The part number is near identical. Is it different? The difference in the number is LB3Z vs LL3Z.

 

[LevittownFordParts.com]

I know it is about 3 years later, but the part is discontinued, and I cannot seem to find any remaining stock. I did find Genuine Ford Bed Track And Cleat Cargo Management System For 5.5 Bed - LL3Z-2655200-A | Levittown Ford which claims to be for the F150. The part number is near identical. Is it different? The difference in the number is LB3Z vs LL3Z.

Hi Joe,
I dont think the original rails even came to fruition. I highly doubt the F150 rails would fit, I am not located near parts or vehicles to check hands on unfortunately.

- Benny

Sponsored