Before & After pics....leveling kit & wheels/tires

[BladeRanger]

Thanks. The Eibach struts were preset at 2.5” and I had to adjust them once installed.

Thanks for the info.

Sponsored

 

[BladeRanger]

Thanks. The Eibach struts were preset at 2.5” and I had to adjust them once installed.

My Eibach rear shocks came in and about to install them this weekend, how is your Eibach installed? Is the tube up or down? Can you share a pics? Thanks again.

 

[McLeadslinger]

I don’t have pictures but the tubes go up and dust boots down. ?

My Eibach rear shocks came in and about to install them this weekend, how is your Eibach installed? Is the tube up or down? Can you share a pics? Thanks again.

 

[BladeRanger]

I don’t have pictures but the tubes go up and dust boots down. ?

Thank You, bro

 

[jflogerzi]

Jelly of all early Rangers who got Alu knuckles vs the now steal ones. Ford cheaping out

 

[CFLRANGER]

Finally was able to finish my project. This is with a 3in readylift level kit. Added readylift intrusion beams and wheels are 20x9 Lonestar with a +10 offset wrapped with 275/55r20 Pirelli Scorion All Terrain plus tires. I have no rubbing and needed no cutting. I know finding info you may be looking for can be difficult sometimes. So if anyone has questions feel free to ask.

 

[CFLRANGER]

Finally was able to finish my project. This is with a 3in readylift level kit. Added readylift intrusion beams and wheels are 20x9 Lonestar with a +10 offset wrapped with 275/55r20 Pirelli Scorion All Terrain plus tires. I have no rubbing and needed no cutting. I know finding info you may be looking for can be difficult sometimes. So if anyone has questions feel free to ask.

I'll post more pics when I take some tomorrow.

 

[SICKQK]

2.5” leveling kit and 265/79R70 tires on stock wheels with 1/4” spacers. Stock pic below

Stance is perfect IMO.

 

[rbeausoleil]

Eibach pro truck 2.5 inch level, Icon rebounds 17x8.5 +25 offset, General Grabbers ATX 275/70r17

Any rubbing/trimming/spacers with this setup? Do you have any "down the side" shots?

 

[DukeCanBuildit]

Any rubbing/trimming/spacers with this setup? Do you have any "down the side" shots?

Garrett hasn’t been active since Feb. 2021 - not sure you’ll hear from him on this. However, that setup likely doesn’t present any issues. I had almost the same setup but with lower offset (+15mm) and didn’t rub - close, but no issues. His +25mm offset keeps him a bit further away from the crash bars. ?

His avatar is a bit revealing - the rear tire looks flush to the wheel well, which seems right for +25mm offset without any spacers. He also has some other pictures in his 8 posts that might be helpful.

Taking this opportunity to update my own before and after shots since replacing the RC level kit.

Rough Country 2-1/2" Level Kit
Fox Performance 2.0 set to 2”
General Grabber A/T X- 275/70R17 (32")
Menace Wheels - 17" x 8" +15mm Offset
ReadyLIFT Anti-intrusion Beams


Before & After with Flares

Before & After without Flares

 

[rbeausoleil]

Garrett hasn’t been active since Feb. 2021 - not sure you’ll hear from him on this. However, that setup likely doesn’t present any issues. I had almost the same setup but with lower offset (+15mm) and didn’t rub - close, but no issues. His +25mm offset keeps him a bit further away from the crash bars. ?

His avatar is a bit revealing - the rear tire looks flush to the wheel well, which seems right for +25mm offset without any spacers. He also has some other pictures in his 8 posts that might be helpful.

Taking this opportunity to update my own before and after shots since replacing the RC level kit.

Rough Country 2-1/2" Level Kit
Fox Performance 2.0 set to 2”
General Grabber A/T X- 275/70R17 (32")
Menace Wheels - 17" x 8" +15mm Offset
ReadyLIFT Anti-intrusion Beams


Before & After with Flares

Before & After without Flares

Thank you for the reply. Love the look of yours with the Fox setup.

 

[DukeCanBuildit]

Thanks very much Ryan - this truck’s been a lot of fun so far.

Sponsored