What did you do to your Ranger today?

[5thranger]

To add to my Line X which was sprayed in yesterday, I bolted in two swing out tool boxes today.
Gotta keep my back seat area clean which always seems to collect this or that…

Hoping tonneau clamps will clear the tool boxes…

That a boy now you are spending some money, and we are just getting started.

Sponsored

 

[RedDakooter05]

It's been snowing here, and my garage is full of slush/water so not much other than just staring at it like a weirdo.

first winter with the frontier and so far I'm pleased. ABS/Traction control isn't over bearing or intrusive.


The Dynapro HT's suck ass in snow though.

 

[DukeCanBuildit]

To add to my Line X which was sprayed in yesterday, I bolted in two swing out tool boxes today.
Gotta keep my back seat area clean which always seems to collect this or that…

Hoping tonneau clamps will clear the tool boxes…

Since you installed those right away, was it easy to thread the bolts into place or did you have to chase the Line X material out with a tap? Just wondering if there’s a benefit to doing it early before it fully cures and becomes as hard as diamonds.

 

[underwhelmed]

Knocked the snow off and started her up. Not leaving the house until Monday. Let’s just say the TN drivers are not used to driving in these conditions….??

 

[5thranger]

Knocked the snow off and started her up. Not leaving the house until Monday. Let’s just say the TN drivers are not used to driving in these conditions….??

I went out to garage to make sure no snow got blown in around garage door and checked damper for cold weather operation and it sounded like it was farting.

 

[ShapeShifter]

Added RockBlox mud flaps, Red grill Lettering, and Covercraft Polycotton seatcovers.

Not bad for bare fingers in 28 degrees F.

 

[Maxacceleration]

That a boy now you are spending some money, and we are just getting started.

I learn quick! Lol
I have another part on hand, and two more incoming

Go Fund Me @ Maxacceleration!

Since you installed those right away, was it easy to thread the bolts into place or did you have to chase the Line X material out with a tap? Just wondering if there’s a benefit to doing it early before it fully cures and becomes as hard as diamonds.

Yes I chased threads. Kinda gooey mucked up. I did have to carve some of it out as my tap got hung up.
Maybe a light drill bit if it had hardened fully…

I love the Line X & tool boxes. A tonneau cover will be in my future for staying stealth.

Lets add in this and this… Not DeeZee, but it should suffice.

 

[AzScorpion]

I learn quick! Lol
I have another part on hand, and two more incoming

Go Fund Me @ Maxacceleration!



Yes I chased threads. Kinda gooey mucked up. I did have to carve some of it out as my tap got hung up.
Maybe a light drill bit if it had hardened fully…

I love the Line X & tool boxes. A tonneau cover will be in my future for staying stealth.

Lets add in this and this… Not DeeZee, but it should suffice.

Never settle for cheap imitations! Just ask those who bought Dukes cheap imitation 404 detailer.

Here's a link for the only true original damper out there because in not in case yours fails, it's for WHEN it fails.

https://www.amazon.com/dp/B07N33NB6...D1VHYN09&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it

 

[Stevedbvik1]

Never settle for cheap imitations! Just ask those who bought Dukes cheap imitation 404 detailer.

Here's a link for the only true original damper out there because in not in case yours fails, it's for WHEN it fails.

https://www.amazon.com/dp/B07N33NB6...D1VHYN09&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it

It could also lead to fuel dilution

 

[DukeCanBuildit]

I learn quick! Lol
I have another part on hand, and two more incoming

Go Fund Me @ Maxacceleration!



Yes I chased threads. Kinda gooey mucked up. I did have to carve some of it out as my tap got hung up.
Maybe a light drill bit if it had hardened fully…

I love the Line X & tool boxes. A tonneau cover will be in my future for staying stealth.

Lets add in this and this… Not DeeZee, but it should suffice.

That console tray is a must - the damper, not so much.

 

[DukeCanBuildit]

Never settle for cheap imitations! Just ask those who bought Dukes cheap imitation 404 detailer.

Here's a link for the only true original damper out there because in not in case yours fails, it's for WHEN it fails.

https://www.amazon.com/dp/B07N33NB6...D1VHYN09&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it

Duke’s 404 is 101 times better - it’s science.

 

[5thranger]

Added RockBlox mud flaps, Red grill Lettering, and Covercraft Polycotton seatcovers.

Not bad for bare fingers in 28 degrees F.

You will like those seat covers I had them on my Frontier.

 

[AzScorpion]

Duke’s 404 is 101 times better - it’s science.

Sad you can't see that it took you 101 more times to TRY and perfect it. ?‍

Please stick to what you do best.....

 

[ShapeShifter]

You will like those seat covers I had them on my Frontier.

Yep, I have the same ones in the Superduty and the TJ.

 

[fjwlobo]

Sad you can't see that it took you 101 more times to TRY and perfect it. ?‍

Please stick to what you do best.....

You just let the Jeannie out of the bottle and gave away how he makes his 404!!!

He takes the 303 and adds a dollop of "Duke's Real Mayonnaise"
? ? ? ? ? ?

Sponsored