TomSim
Well-Known Member
- Thread starter
- #1
So, i finally got my hands on a scanner to check my engine light and the code showing is PO451 which is part of the polution controls
PO451 ERROR CODE
EVAPORATIVE EMISSION SYSTEM SENSOR
PRESSURE SWITCH
I spoke to a Ford mechanic who asked if i had the truck undersprayed/rust proofed which i replied yes back in december. He advised that a common problem was that the Rust Check product can get into the sending unit on top of the gas tank and screw it up and that's been a common problem ...shoot, and the only way to fix it is to drop the tank and replce and clean the connectors and sending unit ....great Hope this helps some of you out there encountering a similar issue
PO451 ERROR CODE
EVAPORATIVE EMISSION SYSTEM SENSOR
PRESSURE SWITCH
I spoke to a Ford mechanic who asked if i had the truck undersprayed/rust proofed which i replied yes back in december. He advised that a common problem was that the Rust Check product can get into the sending unit on top of the gas tank and screw it up and that's been a common problem ...shoot, and the only way to fix it is to drop the tank and replce and clean the connectors and sending unit ....great Hope this helps some of you out there encountering a similar issue
Sponsored
Last edited: