What did you do to your Ranger today?

[Chris M]

Did you need to adjust your hood latch?

The kind he and I have fastens with tape.
Danged tough stuff, I'll tell ya.
No need to adjust hood latch.

Sponsored

 

[GregP]

No sir, its nice thick 3M style tape that sticks onto the hood to keep it from going anywhere. Even with the different design the Aeroskin II has Ive never seen any indication it was not secure at highway speed. No screws, no latch adjustments - super easy install & plenty of youtube videos for reference.

 

[txquailguy]

I finally color matched the letters on my Raptor grill. I also powder coated my skid plate in a prismatic color called “black satin texture”. Both projects came out beautiful!!! Kudos to my neighbor Josh and his awesome homemade powder coat oven…

 

[Rick]

Installed a infinity basslink mini. It fits under passenger seat perfectly and sounds great. There's a grommet on the firewall behind the coolant tank that has a nipple and removable cap that is perfect to route the power wire through. Once the passenger side kick panel and sill trim are removed all the wires can be routed through a channel under the seat track.

 

[paval3]

Washed and applied the 303 Graphene Nano spray. Couldn't find the McQuire's tire gel at the store so got their tire shine spray and used that. Also detailed the interior. Rain was forecasted for later today. I got it done just in time and then the shower started.

 

[RVA Overland]

Finally received my shrockworks ultralight bumper and installed that and my winch. now I can go anywhere . Directions were horrible but I followed others advice and downloaded directions from Addictive Designs site. That allowed me to remove all the bumper parts. When it came to cutting the existing bumper, I had to guess a little as the directions referenced red shaded areas but the directions they sent were printed in black and white. Other than that the stock bumper came off easier than I thought and this went back together pretty easy as well. I still need to get either a shackle or replace the hook with a better option, but this will do for now.

 

[MagneticXL]

Installed Bed Rug tailgate mat

 

[Chris M]

Installed Bed Rug tailgate mat

You chose that over a plastic or rubber tailgate protector....may I ask why?
What did you like about it better than the other kinds?

 

[Strobes]

Scrubbed on my filthy Husky mats. After a 6 month Alaskan winter, they were pretty gross.

 

[VoodooRanger]

Had the tent open overnight to air out after not having used it in a bit. Took the time to install the bug deflector I picked up on sale and gave the truck a quick wash.

 

[Colo_Ranger]

I don't have pictures, because it looks no different than before, but I got my Icon leaf springs installed. I stuck with config 1 and they are really comfy. Right now, I have about 2" lift, so it needs to settle quite a bit. Should net 3/8'' when settled.

 

[MagneticXL]

You chose that over a plastic or rubber tailgate protector....may I ask why?
What did you like about it better than the other kinds?

I had a complete Bed Rug in my old '04 Ranger, just liked the style and material.

 

[jflogerzi]

Washed the truck for the very first time after bringing it here home from Iowa. Bugs galore. Still need to detail it in the garage but CG looks so good. Also installed OEM tremor steps. They really help with cleaning the roof of the truck ?

 

[RedDakooter05]

Nothing too fancy, just got short antenna in the mail from the mainland of our owners.

 

[IdahoRanger]

Scrubbed on my filthy Husky mats. After a 6 month Alaskan winter, they were pretty gross.

I need to do that too.

Sponsored