What did you do to your Ranger today?

[FoD]

Forced it to carry two railroad ties from lumber yard (about a mile). Yard guy wasn't sure I'd want to mess up my new truck, I told him that's what the spray-in liner was for. Worked like a champ and truck really rode great with the extra weight, suspension felt solid, but steady, took city street bumps/divots in stride. Love my Eibachs and the Livernois didn't even pay attention to it.

(DID NOT TROMP PEDAL as tie's were hanging out tailgate ... oh yeah, tailgate cables were both tight )

Sponsored

 

[Rene Michaels]

Been over a year since I've been on ranger5g. Finally got the new wheels and tires.

~ Wheels are KMC KM535 GRENADE OR, Matte Bronze, 18x8.5, 35mm offset, 4.75 backspace
~ Tires are Toyo Open Country A/T III, 285/60R18, 120 S XL, Weight 43lbs, Diameter 31.5 inches, Width 11.5 inches.

I have a RangerLifts 3" leveling kit. I wanted a wider stance without going too far out from under the fenders. I did not need or want more height so I stayed with a 60/18 tire. Had to wait several weeks for the Toyo A/T III's to get off back order. Really happy with the new A/T III's!!!

I did have to modify the front crash bars. Left the stock crash bars on, but loosened the inner-most bolt/nut and removed the outer-most bolt/nut and then pushed the crash bars forward as far as they would go, then re-tightened the inner bolt/nut. Left the out bolt/nut off.

 

[SVTPaul]

Yes it will...there is one like the one you posted above, for those with adaptive cruise control...lot more difficult to install from what I have read on this forum.

Actually I contacted them about this and they said no issue with ACC. Also this facebook post on their page says the same:

However, M2M also has an ebay listing that says not compatible with ACC so that's a little confusing. In my correspondence with them, they said they had fit and tested it on an ACC truck and if I had issues I could return it. As I'm in Canada, maybe someone else is willing to be the guinea pig? I also won't have a truck until May. But this grill is already on my list if it's compatible on the Lariat.

 

[Rangerguy]

Installed passenger side (have a swing out tool box on drivers side) Builtright rack with extinguisher, Led bed light, multi-tool/hatchet, and old Army shovel my dad used to carry in his Ranger over a decade ago.

I wonder if that is available in Canada?

 

[TN Ranger]

Those look great. What size are they?

255 75 r 17

 

[OFC Ranger]

Screwing around with functionality of the Feniex 4200 Mini I got for free.

Not bad for low wattage led bars. These will be for my platform perimeter lighting x10 (4 each side, 2 rear) . They will be primarily for constant on, but it will be nice to have emergency lights if the occasion arrives.

Just a mock up job, the sides are actually two panels long.

 

[ranger-rick-roll]

Installed passenger side (have a swing out tool box on drivers side) Builtright rack with extinguisher, Led bed light, multi-tool/hatchet, and old Army shovel my dad used to carry in his Ranger over a decade ago.

I am on the hunt for a tonneau that works with these racks. Doesn’t look like they interfere. Which one do you have?

 

[j.war525]

Finally got around to installing my BakFlip G2, WeatherTech front and rear floor liners and American flag decals. I think it looks pretty damn sweet with the matte black decals on the black ranger.

 

[the5Gmartian]

Got the RTR rims installed

 

[AzScorpion]

Had to get another tire patched. I swear this truck loves nails, that's twice in 6 months now. Got the dash warning the rear left was low (23 lbs) and 5 seconds later the FordPass app alerted me too.

 

[Radioman]

Enough said...

 

[avi8tornx211]

Builtright bedside rack install. Feels sturdy and like the low profile design. Got the other side as well incase i ever remove the swing case... Or mod to fit. Used a tap from Amazon to clean out the bolt holes from the x-line.

 

[avi8tornx211]

O I also didn't like any of the bed racks available so i built my own on a long weekend i had... Also learned to weld that same weekend, so don't judge the welds lol. But my wife and i climb all over it to load the truck and it holds all given weight no problem. 140lbs estimated.

 

[SVTPaul]

Enough said...

Annoying it's not just included especially when you have the sprayed in bedliner option (or is it included with the tough bedliner?) I ordered my truck with one and waiting to see.

 

[Radioman]

Annoying it's not just included especially when you have the sprayed in bedliner option (or is it included with the tough bedliner?) I ordered my truck with one and waiting to see.

My Ranger did not come with the mid-bed hooks. I had to use up the FordPass Reward points as they were going away on April 1. I ordered the hooks, bolts, several oil filters, air filters, and cabin filters to use up the points. I wanted the battery charger but was told that since the charger did not have a regular Ford part number I could not use the Reward points. It didn't matter to me too much as I have a Battery Tender already.

Sponsored