What did you do to your Ranger today?

[Andy]

Took my truck up a steep trail to this beautiful overlook!

Sponsored

 

[weasel1]

Finally got to use the "pavement princess" as a truck. Sort of. I hooked up utility trailer to haul some rebar home. Needed 100ft to cut into 4ft sections to use as guides for Pylex foundation screws. Building a deck and it's going to be solid.

 

[Glocker]

I got my off road wiring hooked up to LightForce switches and installed in the LightForce fascia!

 

[Mpro2]

I watch the tide movement closely before hitting SLP. Those currents can get you. Surf was perfect. Flat and clear.

Awesome, thanks for the report!

 

[landiscarrier]

I fiddled with FORScan again. Changed my DRL's to parking lights and foglights and got my heated seat icons working on Sync 3.4.

would love to know how you did both of those?!? I do have Forescan, what do I need to change?

 

[weasel1]

would love to know how you did both of those?!? I do have Forescan, what do I need to change?

The heated seat icons were from the drop down menus. Look for one called power seats under apim. I had already selected all the climate ones to get my climate controls, so not sure if that was required or not. It did take a bit before they appeared. You might have to do a soft reset.

The DRL's, have a look here: https://www.ranger5g.com/forum/threads/forscan-crowdsourced-wiki.2008/
On the first page, scroll down to the F-150 spreadsheet. I initially did the "DRL parking light only (halogen). I didn't like that so much. I found later under the BCM drop down menu under DRL that there was a parking light+fog light.

 

[Rascalrider]

New Shoes

 

[FULLSCALE]

Looks good. I like to look in the back ground of pics of garages and see what cool stuff folks have. I like your Ford tool box. Looks nice.

Thanks! It’s actually just an old decal that I put on years ago. It was intended to go on the rear end of a pickup sort of like how some of the Dodge trucks are. There’s also the front corner of my ‘68 Mustang project in the photo too behind the Ranger!

 

[Edsel]

Finally got the 'missing' tie-downs installed in the bed. Dealer sent them to me months ago. Damn COVID!

 

[bjamin]

Finished the lights

 

[JAKE2.3]

Emblems reinstalled, tonneau cover on. Got my mount for the fire extinguisher, now just gotta come up with a solution. I'm thinking of attaching it to some aluminum stock, and mounting the stock to the factory holes. If anyone knows the size of those two holes in the back of the bed, I'd be very grateful. If not, I'm sure I can find it here somewhere. Mount seems very sturdy and well machined for a $30 amazon piece. I almost bought the one from Drake for $85. Glad I didn't.

 

[weasel1]

Emblems reinstalled, tonneau cover on. Got my mount for the fire extinguisher, now just gotta come up with a solution. I'm thinking of attaching it to some aluminum stock, and mounting the stock to the factory holes. If anyone knows the size of those two holes in the back of the bed, I'd be very grateful. If not, I'm sure I can find it here somewhere. Mount seems very sturdy and well machined for a $30 amazon piece. I almost bought the one from Drake for $85. Glad I didn't.

Its an M6. I used the same hole when I adapted a SportTrac bed extender to fit.

 

[4g63det]

Added a SAE 12 volt plug and bed lights to the bed of my truck. Lots of options for plug in adapters. USB, 12V Socket, etc...

 

[Johnv1991]

Emblems reinstalled, tonneau cover on. Got my mount for the fire extinguisher, now just gotta come up with a solution. I'm thinking of attaching it to some aluminum stock, and mounting the stock to the factory holes. If anyone knows the size of those two holes in the back of the bed, I'd be very grateful. If not, I'm sure I can find it here somewhere. Mount seems very sturdy and well machined for a $30 amazon piece. I almost bought the one from Drake for $85. Glad I didn't.

The painted emblems look great! I have the vinyl decals for now but want to get the painted ones eventually. I had them on my focus and they enhance the look big time. Good stuff!

 

[JAKE2.3]

Its an M6. I used the same hole when I adapted a SportTrac bed extender to fit.

Thank you kindly, sir.

Sponsored