Sponsored

Fox 2.0 coil overs installed in 2 wheel drive truck!

Desertranger19

Well-Known Member
First Name
Pete
Joined
Apr 4, 2020
Threads
12
Messages
99
Reaction score
198
Location
Las Vegas, NV
Vehicle(s)
2019 Ford Ranger
Occupation
Shop Foreman
Vehicle Showcase
1
So it’s definitely do able and they bolt right in without any issues whatsoever on our 2 wheel drive Rangers. I will be posting pictures of the stance later on today since I just installed it myself last night and it was about 9 pm when I was done. Took me about 2 hours to do myself with a jack and jackstands. That includes my self alignment on the ground to set my toe by using a measuring tape but will get it professionally aligned on Monday.
Since I was so excited to get it installed, I forgot to take before measurements of the fender height. But, after installing them and short drive, I’m at 38.25 inches up front and 39.5 inches in rear. From center fender down to floor. So I’m happy with that.

09491AE0-8A53-4ECD-AF5B-907ED2151367.webp


C469EB4C-7B96-4569-A9A0-0B4F3C902335.jpeg


6E96F358-D8BA-43BA-B3E0-3E82FE6CAEAA.webp


672154B2-15DC-4FB1-9E7B-3E06C3BD783E.webp


DFE44C7A-C87F-4655-8777-AD19009A3A14.jpeg


43004AAC-ABB2-4AEC-A3E4-7864B2D95E91.jpeg


46233B60-AF6B-4160-B17C-D1EC62432B12.webp
Sponsored

 

JaysOnTheEDGE

Well-Known Member
First Name
Jay
Joined
Oct 17, 2019
Threads
13
Messages
804
Reaction score
1,489
Location
North Carolina
Vehicle(s)
2019 Ranger XLT Sport 4x4, 2021 Escape SEL AWD
Occupation
Office Equipment Technician
Looks good, do you have any side profile shots with the wheel spacers? which version are the spacers 1.0 or 1.5?
 

OxyGenIII

Well-Known Member
First Name
Corey
Joined
Jun 20, 2019
Threads
34
Messages
442
Reaction score
726
Location
Minnesota
Vehicle(s)
2016 Focus ST maybe Ranger in a couple days.
Looks good. Did you leave the Fox coilovers at stock height or did you adjust them taller? If I recall, they come at 2.5" but can be adjusted to 3"?
 

krisrayner

Well-Known Member
First Name
Kris
Joined
Feb 27, 2020
Threads
7
Messages
80
Reaction score
137
Location
California
Vehicle(s)
‘20 Ranger FX2
Looks good. Did you end up lowering the spring perch prior to install afterall?
 


OP
OP
Desertranger19

Desertranger19

Well-Known Member
First Name
Pete
Joined
Apr 4, 2020
Threads
12
Messages
99
Reaction score
198
Location
Las Vegas, NV
Vehicle(s)
2019 Ford Ranger
Occupation
Shop Foreman
Vehicle Showcase
1
I will post side shots later. I’m putting an exhaust on currently.
I went with the 1” spacer from stage3motorsports.
I installed the springs are factory setting how I received them. I thought it over and figured I would try that first before I messed with them. The control arm is nice and straight and the ball joint is not flexed whatsoever so that’s good. Plus the drop down seemed to almost increase travel by 2 inches ??
 

Locrovik

New Member
First Name
Scott
Joined
Feb 13, 2020
Threads
0
Messages
1
Reaction score
0
Location
NC
Vehicle(s)
2019 Ranger
My 19 came from the dealer with fox shocks installed. 31 miles on it when I got it. Im guessing someone ordered it that way? Then didnt end up buying it.
 
OP
OP
Desertranger19

Desertranger19

Well-Known Member
First Name
Pete
Joined
Apr 4, 2020
Threads
12
Messages
99
Reaction score
198
Location
Las Vegas, NV
Vehicle(s)
2019 Ford Ranger
Occupation
Shop Foreman
Vehicle Showcase
1
My 19 came from the dealer with fox shocks installed. 31 miles on it when I got it. Im guessing someone ordered it that way? Then didnt end up buying it.
It was most likely modified by the dealer themselves and sold it that way to make it more appealing to buyers
 

Rviator

Well-Known Member
First Name
Doug
Joined
Apr 30, 2019
Threads
20
Messages
445
Reaction score
870
Location
FLA
Vehicle(s)
A 2019 Ford Ranger of course, and a 2015 Yamaha YZF-R3
Occupation
retired aerospace engineer
Vehicle Showcase
1
Nice job. So what's the verdict on ride and handling quality? Do the Fox have increased damping over the original shocks? Is it a firmer ride, softer? Thanks.
 
OP
OP
Desertranger19

Desertranger19

Well-Known Member
First Name
Pete
Joined
Apr 4, 2020
Threads
12
Messages
99
Reaction score
198
Location
Las Vegas, NV
Vehicle(s)
2019 Ford Ranger
Occupation
Shop Foreman
Vehicle Showcase
1
Im still waiting to get my rear shocks delivered, which should be here monday based on the tracking info, but driving around so far with the front installed only, it really is a much better ride. Any abnormality on the road, the suspension just feels so sturdy and just soaks it up so easily. No bouncing around anymore, it takes the "obstacle" and levels right back up ready for the next one. I dont know if that makes sense, but the suspension is definitely worth it instead of using spacers only. Its stiffer on road but feels "plush" over bad road.
 

Knockdown

Member
First Name
Greg
Joined
Dec 29, 2019
Threads
1
Messages
8
Reaction score
23
Location
Palm Bay, FL
Vehicle(s)
Ranger XLT Supercab
Just had the Fox 2.0 coil overs installed today, I dropped the spring perches 0.6” from the provided location. This resulted in an average of 1.7” lift on the front for my 2WD XLT Supercab. I also installed Fox 2.5 rear shocks because I wanted some tuning capability in the back. The truck is very stable now!
 

I Truck Naked

Well-Known Member
First Name
Josh
Joined
Jan 3, 2020
Threads
4
Messages
59
Reaction score
109
Location
Baton Rouge
Vehicle(s)
2019 Ranger XLT
Occupation
Jaguar / Land Rover Senior Technician
Quick question, but does the 265/70 clear the control arm without the spacer?
 
OP
OP
Desertranger19

Desertranger19

Well-Known Member
First Name
Pete
Joined
Apr 4, 2020
Threads
12
Messages
99
Reaction score
198
Location
Las Vegas, NV
Vehicle(s)
2019 Ford Ranger
Occupation
Shop Foreman
Vehicle Showcase
1
Quick question, but does the 265/70 clear the control arm without the spacer?
yes, no rubbing at all. I wanted to push the wheels/tires out tho for a slightly more aggressive stance is all
Sponsored

 
 








Top