WLFPIR8
Well-Known Member
- First Name
- Ethan
- Joined
- Jun 25, 2019
- Threads
- 7
- Messages
- 175
- Reaction score
- 393
- Location
- Central Ohio
- Website
- whor.us
- Vehicle(s)
- 2019 Ranger Lariat FX4/Sport in Saber Orange
- Occupation
- Systems engineer by day, maker and multimedia guru by night.
- Vehicle Showcase
- 1
- Thread starter
- #1
if you were like me, and wanted to run some wiring along the frame, but can't find the correct "firr tree push mounts" for the holes (5/16, ~10mm) because they all are for 1/4 inch holes (at least when you search on amazon, etc). I've found the solution!
Panduit has a good selection, and you can buy them individually from Mouser. These are the only ones I've found that don't need to be bulk ordered (500 qty) and that actually fit! There's a short video clip of me trying to remove one...
https://www.mouser.com/ProductDetail/644-PUM-100-M30
https://www.mouser.com/ProductDetail/644-PUM-100-2S-D30 You can get them with or without the corresponding zip tie.
Panduit is one of the manufacturers for a ton of wiring harness mounts and stuff anyway, but finding these wasn't terribly easy because so many don't list the hole diameter...
Panduit has a good selection, and you can buy them individually from Mouser. These are the only ones I've found that don't need to be bulk ordered (500 qty) and that actually fit! There's a short video clip of me trying to remove one...
https://www.mouser.com/ProductDetail/644-PUM-100-M30
https://www.mouser.com/ProductDetail/644-PUM-100-2S-D30 You can get them with or without the corresponding zip tie.
Panduit is one of the manufacturers for a ton of wiring harness mounts and stuff anyway, but finding these wasn't terribly easy because so many don't list the hole diameter...
Sponsored