Which Running Boards/Side Steps did you purchase?

[TheFixer253]

Has anyone seen wheel to wheel running boards for a supercab? (Providing a step for access to the front of the bed)
F-250:

Yes, I ordered APS iBoard side step railings for my supercab 2020 Ranger. I'm very pleased with them. They cost about $200 on Amazon and took about an hour to install in the factory bolt holes. No drilling. Factory running boards are about $600. Easy choice.

Sponsored

 

[DaytonBenson]

Took them a while to develop but works well on mine.

The door sills look amazing with them, too. Thanks for sharing this info.

 

[Drew Toner]

Amp Research.
Perfect height and fold out of the way.

Very nice!!
And the black molding on the bottom of doors is part of the steps?? That finishes it off nicely!

 

[Turborave]

Yes, I ordered APS iBoard side step railings for my supercab 2020 Ranger. I'm very pleased with them. They cost about $200 on Amazon and took about an hour to install in the factory bolt holes. No drilling. Factory running boards are about $600. Easy choice.

these?

https://www.amazon.com/APS-iBoard-R...rds+ranger&qid=1593262250&s=automotive&sr=1-5

these are interesting too:

https://www.amazon.com/dp/B07T9HZ7M...9Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

 

[TheFixer253]

these?

https://www.amazon.com/APS-iBoard-R...rds+ranger&qid=1593262250&s=automotive&sr=1-5

these are interesting too:

https://www.amazon.com/dp/B07T9HZ7MS/ref=sspa_dk_detail_6?psc=1&pd_rd_i=B07T9HZ7MS&pd_rd_w=AyXXg&pf_rd_p=48d372c1-f7e1-4b8b-9d02-4bd86f5158c5&pd_rd_wg=Bl6lU&pf_rd_r=W20PP4YBHKCFY2JE6ZWE&pd_rd_r=ebb6f83a-3eaa-4375-9ea1-f44493d31890&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzMFExRUlYWFI5Vjk4JmVuY3J5cHRlZElkPUEwNjA0OTg4MUMwU1pNQ0dSRUNINyZlbmNyeXB0ZWRBZElkPUEwNjc3NjE1MzE2UlRNQU5NVFpBQyZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCinZkb05vdExvZ0NsaWNrPXRydWU=

The first link are the running boards I installed, the 5-inch width. Your second link does look interesting, a more aggressive look.

 

[Turborave]

hmm.. these are very OEM looking too:

https://www.amazon.com/gp/product/B07VTTXF37/ref=ox_sc_act_title_1?smid=A3CQ5833KTZ4RX&psc=1

thanks for sharing that brand, im about to spend 390 at the dealer for OEM ones..

 

[Jake]

Go Rhino Dominator D6. Purchased from Stage 3. They tuck up nicely and are the perfect width for a step in my opinion.

 

[Sandman Ranger]

Very nice!!
And the black molding on the bottom of doors is part of the steps?? That finishes it off nicely!

Molding (sill guards) are a separate item. Bushwhacked sill guards. Also a good item that offers good protection and nice look. Works with other steps. For what they cover, cost not bad.

Added link:
Bushwacker 14099 Black Trail Armor Rocker Panel & Door Sill Protectors for 2019 Ford Ranger, 4pc Set https://www.amazon.com/dp/B07QB8R8QW/ref=cm_sw_r_cp_api_i_FR.9EbQHTGRVV

 

[Murphie]

Posted in an earlier version of this thread, but I went with Go Rhino 5" OE Xtreme Low Profile SideSteps. I ordered them from RealTruck.com, and they shipped direct from Go Rhino. Some other Go Rhino boards on the forum show to have the name tag riveted to the board. But these were just a sticker, so I took them off.

 

[Ranger_Rocks]

Molding (sill guards) are a separate item. Bushwhacked sill guards. Also a good item that offers good protection and nice look. Works with other steps. For what they cover, cost not bad.

Added link:
Bushwacker 14099 Black Trail Armor Rocker Panel & Door Sill Protectors for 2019 Ford Ranger, 4pc Set https://www.amazon.com/dp/B07QB8R8QW/ref=cm_sw_r_cp_api_i_FR.9EbQHTGRVV

Anyone have pics of these Bushwackers on a SuperCab ?

 

[scssteve]

Where did you order them from? I really like the look of them as well.

Got them from Amazon. When I got them, 1 one of the holes didnt line up right, and there was a patch on the bottom of the same that didn't get coated. Tried to contact N-FAB about it but all they did was tell me to contact Amazon for a replacement. Not real happy with their CS, as its not Amazons' problem. I think N-Fab should step up and replace the one that has the issues.

I will say that they do look damn good on my truck and the install was really easy.

 

[DannyL]

Anyone have pics of these Bushwackers on a SuperCab ?

https://www.bushwacker.com/bushwack...-incl-side-panelssill-plate-cover-4-piece-set

 

[SubVet]

TYGER https://www.carid.com/tyger/running-boards/

Since I have the chrome package I put a chrome trim piece on the running boards

 

[Ranger_Rocks]

https://www.bushwacker.com/bushwack...-incl-side-panelssill-plate-cover-4-piece-set

Bushwacker shows only one photo and it's the same for both SCab and SCrew.

I'm interested in seeing the rest towards the rear door around the SCab door latch that sits on the sill.

 

[MBRanger]

Howdy Ace!
I went with the Westin HDX Stainless Drop Step Bars and had them powder coated to match my Sport/Magnetic Trim.

Truth-be-told.... I'm not a yuge fan of any side step/boards, but my Wife called this shot!

I am seriously considering the AMP Power Steps because I like the idea of the boards retracting out of sight. However, it appears from the few people who have put on the AMP's, the side boards do not retract, but just tuck along side the rocker panel?

If that's the case, I'll just keep what I have!

Want to come back to this topic, do the stainless plates on the steps come off? If they do, are they black underneath?

Sponsored