What did you receive in the mail today for your Ranger?

[y2krtaf]

Do yourself a favor and make sure you remove the axle nut and swaybar end links. It makes the installation so much easier. As shipped they raise the front 2" & if you want it higher adjust them before you install them.

Absolutely,did the same when I leveled it.Have a fresh pair of axle nuts waiting.
‘Truly not worth the risk for a pair of cheap nuts.

Sponsored

 

[AzScorpion]

Staun Automatic Tire Deflators (Standard Duty 6-30 PSI)

Tire Pressure Gauge - (0-60 PSI) Heavy Duty, Certified ANSI Accurate

Edit: added links

I have a tire gauge similar to that one and it works great. It's nice how it glows at night too. I also have those Staun Tire deflators in my Amazon wish list. I have a few friends with Jeeps who swear by them.

 

[kevstaarr]

Those Staun deflators are great! Once they're set, makes airing down so easy!

 

[Glocker]

ARB Digital Tire Inflator Gauge - ARB601

For use with my air compressor. (see above)

Whoa! Wait a minute here! Tell me more!

Does this work in line with your tire inflator? Does it use the smaller, Japanese style quick release air chuck connectors?

I'm asking because I have a Smittybilt tire inflator, but the in-line air gauge that it came with it about useless. When airing up, I have to fill up the tire, take off the air hose, check the air pressure, put the air hose back on, fill it up more, take it back off, check the air pressure, put the hose back on, fill it up more...

You probably get the picture.

 

[GregM]

ARB Digital Tire Inflator Gauge - ARB601

For use with my air compressor. (see above)

Well this is a nice set up with inflate/deflate function. This should be right up there
with AZ damper

 

[Glocker]

Works as both. Inline with my Ford/ARB compressor or stand alone gauge. I'm not familiar with Japanese style air chucks.

ARB Digital Tire Inflator Review

Specs PDF doc below.

Thanks for the video. It appears it comes with US standard industrial air fittings according to the link. No go for me.

 

[Swingpure]

My Amazon foam cannon and 40° pressure washer tip arrived in the mail today, allowing me to use my new pressure washer, picked up earlier today. Everything worked well.

 

[kevstaarr]

These came today, can’t wait to get them mounted!

 

[Swingpure]

My rear Weathertech floor mats arrived today. They fit like a glove. Originally I just ordered the front ones, thinking that I would use something cheaper for the rarely used back seats, but the cheaper options, just did not make the grade.

Weathertech all the way!

Accessories still to come, my Extang Trifecta Signature 2.0 Tonneau cover which is likely 5 weeks away and my bed extender which was suppose to come with the truck, but is back ordered and it’s arrival date is totally unknown. Hopefully sooner than later.

I am still debating on whether to get the tailgate lettering or not. I think they look great, but I have been trying to stick to getting functional accessories, at least for now.

 

[KnightRanger]

Was excited to get these today.
Diode Dynamics Ditch light brackets
Baja Design S1 ( I like the low profile look)
Lightforce ranger switch fascia with switches.
Now...to find wiring access hole from cab to hood through firewall...

 

[JAKE2.3]

Was excited to get these today.
Diode Dynamics Ditch light brackets
Baja Design S1 ( I like the low profile look)
Lightforce ranger switch fascia with switches.
Now...to find wiring access hole from cab to hood through firewall...

I drilled a small hole in the upper right side of the rubber firewall boot where the main harness goes through. About the only thing I could come up with.

 

[Glocker]

Was excited to get these today.
Diode Dynamics Ditch light brackets
Baja Design S1 ( I like the low profile look)
Lightforce ranger switch fascia with switches.
Now...to find wiring access hole from cab to hood through firewall...

This is the tool I would recommend for breaching that firewall boot:
https://www.amazon.com/gp/product/B073WZCL8Q/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

It's a little safer than a drill bit to lessen the chance of damaging the main wiring harness.

 

[JAKE2.3]

This is the tool I would recommend for breaching that firewall boot:
https://www.amazon.com/gp/product/B073WZCL8Q/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

It's a little safer than a drill bit to lessen the chance of damaging the main wiring harness.

Hmm I didn't know that existed ha. Yeah I was careful doing mine. I stayed far away from the main wires. Used a real small bit so the idea would be that the hole would kinda "seal" around the wire.

 

[BHunted]

This is the tool I would recommend for breaching that firewall boot:
https://www.amazon.com/gp/product/B073WZCL8Q/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

It's a little safer than a drill bit to lessen the chance of damaging the main wiring harness.

Worth every penny...

 

[KnightRanger]

This is the tool I would recommend for breaching that firewall boot:
https://www.amazon.com/gp/product/B073WZCL8Q/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

It's a little safer than a drill bit to lessen the chance of damaging the main wiring harness.

Thanks, I actually bought that same tool, Ive seen it here in the forums, lol.
Thanks for the tips!

Sponsored