Remote Transmission Dip Stick Aftermarket Support?

[kendive]

Does the 1/2 inch tubing on the Harbor Freight pump slide down the Fitzstick tube without any problems ??? Referring to the Pittsburg Multi Pump
Asking about using it for removal, not adding....have a small funnel for adding.

They give you an adapter to even smaller black tubing that would probably fit.

Sponsored

 

[Msfitoy]

This is what I used.
Hand pump fits qt. & gal. jugs

I use the same with 1/4" tubing...does a great job pumping in or removing small amounts...for complete extraction, I use the electric pump with the same tubing...you don't need anything larger than 1/4" tubing...

 

[Colo_Ranger]

What’s the website to order these? I can’t find it on my phone.

 

[Fitzmotor]

What’s the website to order these? I can’t find it on my phone.

To order the pump or the dipstick?

 

[Ace]

To order the pump or the dipstick?

The dipstick. I would like to know where to order as well.

 

[Fitzmotor]

The dipstick. I would like to know where to order as well.

I'm working on it, they are small batch production, but it's ramping up, I hope to put a link up here in the next 60 days.

Thanks for your interest!

 

[jawalke]

I’ll be buying one of these too when they’re available. I’m glad you took the challenge of making them

 

[Figarou]

I'm working on it, they are small batch production, but it's ramping up, I hope to put a link up here in the next 60 days.

Thanks for your interest!

I can see it now.

Website is up. I place my order. Ok..... what's taking so long? Why can't move what's in my cart to checkout? Now it says "out of stock?"

Had a similar experience with the PS5.

 

[Fitzmotor]

Hopefully it will be a more positive experience!

 

[Figarou]

Hopefully it will be a more positive experience!

I don't think I'll have problems trying to order the dipstick.

This is what happened when I tried to order a PS5 online. As soon as it was available online, the site was flooded with buyers. Some had bots that could quickly put the order in. It made the website slow down a lot. That's why I couldn't move what I had in my cart to checkout.

I believe I'll have a pleasant experience ordering the dipstick.

Click, click, click, checkout, wait for package. ?

 

[TJC]

I dunno! Wait till the F150, Bronco, Mustang, and all the other folks with 10R80 transmissions get wind of this. I see flash panic buying and bots flooding Fitz's website! Denial of Service type outages!

One can only hope, Huh Fitz!



Seriously, I think Fitz is going to sell a lot more of these than he thinks!

 

[Fitzmotor]

Hey,

Check it out, I have competition, another member, not a surprise, the whole no factory dipstick thing really calls to the aftermarket suppliers.

It's a bit different than mine, I wonder if it's easier or more difficult to install, it is a smaller diameter hose, just like the B&M one, curious to see how it's routed, I stayed away from below the intake manifold, the turbo fills that area, but it looks like he made it work, he's got me on the price point, fitment, quality and overall presentation, I hope I got him.

Heck, now you guys have choices, that is a good thing?

 

[NeilP]

Hey,

Check it out, I have competition, another member, not a surprise, the whole no factory dipstick thing really calls to the aftermarket suppliers.

It's a bit different than mine, I wonder if it's easier or more difficult to install, it is a smaller diameter hose, just like the B&M one, curious to see how it's routed, I stayed away from below the intake manifold, the turbo fills that area, but it looks like he made it work, he's got me on the price point, fitment, quality and overall presentation, I hope I got him.

Heck, now you guys have choices, that is a good thing?

https://www.ranger5g.com/forum/thre...nsmission-dipstick-upgrade.26979/#post-622763

I'm sticking with the Fitzmotor brand!

 

[Figarou]

Hey,

Check it out, I have competition, another member, not a surprise, the whole no factory dipstick thing really calls to the aftermarket suppliers.

It's a bit different than mine, I wonder if it's easier or more difficult to install, it is a smaller diameter hose, just like the B&M one, curious to see how it's routed, I stayed away from below the intake manifold, the turbo fills that area, but it looks like he made it work, he's got me on the price point, fitment, quality and overall presentation, I hope I got him.

Heck, now you guys have choices, that is a good thing?

https://www.ranger5g.com/forum/thre...nsmission-dipstick-upgrade.26979/#post-622763

AND...... he's sold out.

 

[TJC]

Personally, I want a dipstick that is accurate every time, and I want a real dipstick, not a weighted wire. I own both the B&M, and MBS products, and I held up installing the B&M for 6 months precisely for that reason.

Fitz came through and MBS didn't disappoint. I happy, ecstatic with my choice.

Sponsored