Remote Transmission Dip Stick Aftermarket Support?

[IdahoRanger]

Open hood....
Un-screw thing-a- ma bob
Screw on the new what- chum-call-it
Done !!!

You missed a step: lose 10 mm socket. ?

Sponsored

 

[quangdog]

You missed a step: lose 10 mm socket. ?

Also: Before you begin, ensure your TGD is in it's fully locked and upright position.

 

[Grumpaw]

I'm also sure that Mike will include some more specific instructions, the most important being, "Righty Tightly, Lefty Loosey....
Of course, if some of these Dip Sticks make it to Aussi Land, than, cause their upside down, its "Lefty Tighty, Righty Loosey" !!!

 

[Msfitoy]

I'm also sure that Mike will include some more specific instructions, the most important being, "Righty Tightly, Lefty Loosey....
Of course, if some of these Dip Sticks make it to Aussi Land, than, cause their upside down, its "Lefty Tighty, Righty Loosey" !!!

That is key instruction there if you're trying to remove the dipstick cap while laying on your back upside down...just as if you're down under...

 

[BS67]

its "Lefty Tighty, Righty Loosey" !!!

 

[TJC]

I'm also sure that Mike will include some more specific instructions, the most important being, "Righty Tightly, Lefty Loosey....
Of course, if some of these Dip Sticks make it to Aussi Land, than, cause their upside down, its "Lefty Tighty, Righty Loosey" !!!

Toilet bowl flushes backwards, bolts tighten backwards. It's cause they are in the southern hemisphere - Upside down ya know!

 

[Fitzmotor]

UH, it's a 10 minute job with 2 tools, who needs instructions, we don't need no stinking instructions!

Open hood....
Un-screw thing-a- ma bob
Screw on the new what- chum-call-it
Done !!!
Of course, these are very technical terms many of you may not be familiar with, but I can assure you all that these instructions are the same type used by many mechanics.

Now you guys, I have a very specific set of instructions that I actually want you to read, not that I ever read the instructions until it wont work or fit.

But yes, if I can get them done, there is important info in there, AND I even included pictures, for example you would not be happy if you tried to feed the dipstick up from the bottom, it's down from the top, but you will see, I will get them out soon.

 

[The Last Ranger]

Now you guys, I have a very specific set of instructions that I actually want you to read, not that I ever read the instructions until it wont work or fit.

But yes, if I can get them done, there is important info in there, AND I even included pictures, for example you would not be happy if you tried to feed the dipstick up from the bottom, it's down from the top, but you will see, I will get them out soon.

We all promise to read the instructions, or at least I promise!!

 

[Fitzmotor]

So I got 11 sticks out, they were in the way in my tiny shop, I stopped production to pack them up and get them out, it takes a long time to box them up, surprised me.

So on along about the beginning of next week you should see some real world feedback from the members here.

I hope to have the 19 more I have done by then and out the door, the hose shop said they would have the second half of my order done last week.... crickets!

 

[Essthreetee]

So I got 11 sticks out, they were in the way in my tiny shop, I stopped production to pack them up and get them out, it takes a long time to box them up, surprised me.

So on along about the beginning of next week you should see some real world feedback from the members here.

I hope to have the 19 more I have done by then and out the door, the hose shop said they would have the second half of my order done last week.... crickets!

YES!!!!
Now I can’t wait to get the call from you Fitz!!!
Looking forward to it.

 

[The Last Ranger]

Now you guys, I have a very specific set of instructions that I actually want you to read, not that I ever read the instructions until it wont work or fit.

But yes, if I can get them done, there is important info in there, AND I even included pictures, for example you would not be happy if you tried to feed the dipstick up from the bottom, it's down from the top, but you will see, I will get them out soon.

So I'm guessing your counting on feedback from those people on how the install went along with notes/suggestions on the installation procedure.

 

[Fitzmotor]

I just couldn't wait, they take time to make, they were slowly piling up, I figured no point in them collecting dust, get them out there.

Also, just because I think it's as good as I can make it, doesn't mean the rest of the world will agree, I want to know what people think, sooner than later.

Plus, if feedback is decent I will immediately order more parts.

Besides they were really in the way, my shop is very small.

 

[Big Blue]

Now you guys, I have a very specific set of instructions that I actually want you to read, not that I ever read the instructions until it wont work or fit.

But yes, if I can get them done, there is important info in there, AND I even included pictures, for example you would not be happy if you tried to feed the dipstick up from the bottom, it's down from the top, but you will see, I will get them out soon.

Just printed them out. They look very detailed. Will read over them while I'm out of town waiting for stick to arrive.

 

[Fitzmotor]

Hey, they are not complete, there is a page of misc notes still coming, but important notes.

 

[Blue Streak]

Hey, they are not complete, there is a page of misc notes still coming, but important notes.

Like always. It will take longer to read the instructions & get prepared than to do the install.

Sponsored